• Jason2357@lemmy.ca
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    2
    ·
    1 year ago

    It’s going to depend on the devices involved, but I get about 600 megabit or so between two computers over tailscale on my network (really, wireguard). That’s what, 10 HD video streams? Of course, it’s going to depend on device cpu capability and network bandwidth.

    • MonkCanatella
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      On your own network? I’m not sure the reason to use tailscale between computers on the same network, nor if that’s really relevant to the discussion. If tailscale was capable of 600mbps from outside the network then that would be another story

      • Jason2357@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        That 600mbps is the throughput of the encryption on those devices. It’s no different crossing networks, but the speed will be limited by the network speed. The benefit of a p2p vpn is that you don’t need to shut it off when you join the same network. The devices remain accessible at the same ip whether they are on the same network, or if one is somewhere else. The overhead is negligible and you gain the security isolation that would normally require subnets and a firewall.

        In the end, yes, I can stream HD video just fine from another network. For most people, the limitation will be their home ISP’s uplink speed.