TurnItOff_OnAgain@lemmy.world to Mildly Interesting@lemmy.worldEnglish · 9 months agothis plug doesn't have the little holeslemmy.worldimagemessage-square120fedilinkarrow-up1282arrow-down130
arrow-up1252arrow-down1imagethis plug doesn't have the little holeslemmy.worldTurnItOff_OnAgain@lemmy.world to Mildly Interesting@lemmy.worldEnglish · 9 months agomessage-square120fedilink
minus-squarethis_1_is_mine@lemmy.worldlinkfedilinkarrow-up3arrow-down4·edit-29 months agoUSA plug should be flipped. The ground should be on top.
minus-squareZorg@lemmings.worldlinkfedilinkarrow-up3·9 months agoYes, except all bulky plugs are designed for plugging into an outlet with the ground at the bottom.
minus-squareprayerlinkfedilinkarrow-up3·9 months agoNot really. Most plugs I see have ground at the bottom and there’s no official standard for orientation.
minus-squareblazeknave@lemmy.worldlinkfedilinkarrow-up2·9 months agoNo. Ground is on the bottom. Almost always. Unless it’s sideways.
minus-squarepythonoob@programming.devlinkfedilinkarrow-up1·9 months agoThen just take it out and flip it around. It’s not hard. Just turn off the the circuit at the junction box first.
USA plug should be flipped. The ground should be on top.
Yes, except all bulky plugs are designed for plugging into an outlet with the ground at the bottom.
Not really. Most plugs I see have ground at the bottom and there’s no official standard for orientation.
No. Ground is on the bottom. Almost always. Unless it’s sideways.
Then just take it out and flip it around. It’s not hard. Just turn off the the circuit at the junction box first.