• itscountolaf@lemmy.world
    link
    fedilink
    English
    arrow-up
    45
    arrow-down
    2
    ·
    1 year ago

    I really miss replaceable batteries in my phones. It was so good to just swap an empty battery out for a fully charged one. Glad to see that making a return.

    • everythingsucks@lemmy.world
      link
      fedilink
      English
      arrow-up
      28
      arrow-down
      5
      ·
      1 year ago

      I personally don’t. I’m not anti removable battery by any means but my phones battery hasn’t annoyed me to the point where I wanted to change it since I got it in 2018.

      • shinjiikarus@mylem.eu
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        I wouldn’t worry too much either way. We won’t get back the plastic pop off backs of yesteryear. While “removable batteries” get the most clicks the rules aren’t really regulating phone design, but try to reduce e-waste and force OEMs to plan for recycling batteries. The part about removability is a soft “should”, while there are hard “must” quotas for circular battery usage and recycling. Apple will probably need to stop their practices of DRMing batteries (which they already partially did in the EU, as far as I know, I switched the battery in my old 12M, before gifting it and iOS didn’t raise any warnings about the battery). But implementation of non-binding EU rules into national law is susceptible to interpretation and OEMs will lobby heavily. IP68 rating is here to stay, so is adhesive, I can imagine you don’t need special tools, but still need to release some screws and adhesive before swapping the battery in the end.

      • Wrench@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        My old galaxy s7 was getting about a half day on light use by the end. About 1 hour with heavy use. Don’t remember how long I had it, but I’m guessing about 4 years.

        The USB port wore out too and wasn’t repairable individually. Repair would cost more than the phone was worth at that point.

        Battery replacement and repairable design is a very important matter. Moores law doesn’t hold true anymore, and devices can stay relevant for a long time if manufacturers don’t force obsolescence

        • AnUnusualRelic@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          The amount of ewaste created because of perfectly fixable things like that is staggering. It’s akin to trashing your car because the tyres are getting old.

    • starcat@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Me too, but I also really like the water resistance in our current generation of phones. Is it possible to get water resistance AND a removable battery? I’d sign up for that.

  • adhdplantdev@lemm.ee
    link
    fedilink
    English
    arrow-up
    24
    arrow-down
    1
    ·
    1 year ago

    Doesn’t the steam deck already support this? It has a user accessible battery and replacements for sale

    • richyawyingtmv@lemmy.ml
      link
      fedilink
      English
      arrow-up
      51
      arrow-down
      1
      ·
      edit-2
      1 year ago

      And it’s fucking superglued in. You have to use a heat gun to even have a chance of removing it, and Valve have acknowledged they may change it in the future as right now it is admittedly ridiculous.

      So yes but technically no. It is not immediately user serviceable.

    • visor841@lemmy.world
      link
      fedilink
      English
      arrow-up
      24
      ·
      1 year ago

      To replace the battery in the Steam Deck, you need to heat up the adhesive to allow the battery to be removed, which I believe would violate this directive. That said, it doesn’t seem like it would be too difficult for Valve to make it a bit easier in the next Steam Deck and comply.

    • nottheengineer@feddit.de
      link
      fedilink
      English
      arrow-up
      16
      arrow-down
      1
      ·
      1 year ago

      Not really, changing out the battery takes 2 hours because you need to take out everything else first and it’s anything but foolproof.

      • WaveCommander@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        For the record, you don’t have to take “everything else” out first. It’s actually quite accessible once removing the Steam Deck back plate, which is easily done with a Phillips head screwdriver. The bulk of the 2-4 hour estimate on iFixit is dealing with the battery adhesive. (source: I’ve opened my Steam Deck to swap the SSD, and I just opened it to attempt a band-aid fix to the right bumper after dropping the Deck directly on it while waiting for the part to restock)

    • Shadywack@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      arrow-down
      1
      ·
      1 year ago

      It’s real great on Valve for helping furnish the parts and make it less difficult, the language passed reads as “with no tool, a tool or set of tools that is supplied with the product or spare part, or basic tools.”

      Under that, Valve might already be fully compliant given that official parts are sold readily and the Deck can be opened up with basic tools. What’s most wonderful about this is how it’ll apply to phones.

  • forkbomb@lemmy.world
    link
    fedilink
    English
    arrow-up
    22
    ·
    1 year ago

    After looking for a battery for a 3ds, I wonder how long they will have to make them available.

      • forkbomb@lemmy.world
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 year ago

        No way! That’s really cool! Mines a New 3DS XL so a little different I think but that explains the godlike battery on the pro controller.

  • Quinten@lemmy.worldM
    link
    fedilink
    English
    arrow-up
    9
    ·
    1 year ago

    EU on a roll last view years. Wonder if there are going to be European models with replacable batteries and American without. You already see that kind of behaviour with Apple: end of this year you can side load apps in the EU but in America they are stuck with the app store (according to the rumors).

    • eldain@feddit.nl
      link
      fedilink
      English
      arrow-up
      9
      ·
      1 year ago

      That is easy in software only, in hardware you would neglect economy of scale. It is more likely it gets sold as an innovation in some form to safe money and face.

    • damnYouSun
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      A guarantee apple trying spin it into their own decision.

      Making two separate versions for the US in EU market would be really expensive so I doubt it’s gonna happen.

      • Fedizen@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        They could use proprietary screws or add glue. Of course I’d just buy the EU model in that in case, but I wouldn’t put it past the mega corps to just be trashy because they can.

      • Nilz@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        It’s really expensive but they also might make really a lot of money with their current practice that makes it worthwhile to make two seperate versions.

  • Burstar@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    27
    ·
    1 year ago

    Would be nice if we went back to using the AA, AAA type batteries too. I’ve got like 20 rechargables still good and only need them for my controllers and remote. Everything else seems to have done away with them. :(

    • saucyloggins@lemmy.world
      link
      fedilink
      English
      arrow-up
      50
      ·
      1 year ago

      The battery life on a Switch/Steam Deck would be horrific with AA/AAA batteries. Plus the reasoning for this legislation is to reduce e-waste, using AA/AAA batteries just creates more.

      • SCB@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        arrow-down
        1
        ·
        edit-2
        1 year ago

        Reduce e-waste by… Producing millions of unused batteries.

      • corsicanguppy@lemmy.ca
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        3
        ·
        1 year ago

        What part of the legislation requires small batteries like AAs?

        If the unit has a LIon battery, make it slide out like UPS batteries do. Make it a custom shape if you hate people, or make it a common hi-density cell if you aren’t apple.

        • Quokka@quokk.au
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          Dear manufacturers, do not fucking make anything a custom shape.

          Fuck you and your proprietary shaped bullshit that only works on one device and nothing else.

          Sincerely, Everybody.

      • Revan343@lemmy.ca
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        2
        ·
        1 year ago

        Fuck it, rechargable lithium-ion AAs. Yes I know the chemistry doesn’t let your voltage go that low, didn’t stop the few Chinese companies that successfully made them anyways.

        …the integrated buck converter does waste a lot of space though

    • _Hadek@lemmy.world
      link
      fedilink
      English
      arrow-up
      18
      ·
      1 year ago

      As much as standard AA,AAA batteries are nice and common. The issue is that they are not that energy dense. So for a 5000MaH battery you would need a larger space if it where AA’s than if it’s a nice and flat LiPo pack.

      Also our modern devices use pretty specialized charging/power needs which require custom batteries.

      Can’t fast charge an AA with 120W’s of power.

      Though I remeber the days a low battery on my gameboy didn’t have to mean finding a cable but just plopping some fresh AA’s. Felt like reloading irl.

      • ZILtoid1991@kbin.social
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        They probably could just make some standard Li-Po packs. Some Li-Ion packs did become de-facto standards (see the Nokia battery), so things like that did happen.

    • Pea666@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I loved the replaceable batteries on my Xbox 360 controllers. Just having a batch of rechargeable batteries ready to go meant near endless gaming.

      Now a second controller is nearly mandatory and they’re damn expensive.