My current bike has no motor and uses a Gates CDX belt drive with a Shimano 8-gears internal gear hub
I believe thats enough, more gears are not needed
my older chain bike had a motor and I could just let the motor do the work if my chain got too rusty/dirty which resulted in higher wear (loose chain)
the Shimano Alfine 8 has 3 gears below the direct drive (I think what that is called? the one similar to a single speed no gears system) which is pretty ok for most hills
interestingly enough the gear translation on the higher gears is quite steep
while I cruise roughly 18 km/h on the direct drive gear, the next higher one already is more like 22-23 km/h
the more expensive Shimano Alfine 11 has 4 gears below the direct drive gear and the higher ones are still steep increases but slightly less
No idea about cheaper internal gears hubs or other brands though
What’s your setup? Ideally I’d like to get some sort of mid drive with IGH but I might just pick up something like a Breezer with no motor.
My current bike has no motor and uses a Gates CDX belt drive with a Shimano 8-gears internal gear hub
I believe thats enough, more gears are not needed
my older chain bike had a motor and I could just let the motor do the work if my chain got too rusty/dirty which resulted in higher wear (loose chain)
The Shimano 8 climbs ok?
the Shimano Alfine 8 has 3 gears below the direct drive (I think what that is called? the one similar to a single speed no gears system) which is pretty ok for most hills
interestingly enough the gear translation on the higher gears is quite steep
while I cruise roughly 18 km/h on the direct drive gear, the next higher one already is more like 22-23 km/h
the more expensive Shimano Alfine 11 has 4 gears below the direct drive gear and the higher ones are still steep increases but slightly less
No idea about cheaper internal gears hubs or other brands though