• 84615_on_resu@lemmy.world
    link
    fedilink
    English
    arrow-up
    22
    arrow-down
    2
    ·
    1 year ago

    It also had an official extended battery, which came along with a special backplate. It made the phone a bit bulkier, but I didn’t care. Battery went from 2100mah to 3000mah and it was great. I miss these types of accessories. I don’t care about glass back or waterproof phones.

    • Osa-Eris-Xero512@kbin.social
      link
      fedilink
      arrow-up
      14
      arrow-down
      3
      ·
      1 year ago

      Waterproofing _is_an important factor for sustainability for phones though. Water damage was THE cause of death of smartphones for a very long time until waterproofing became the standard for phones.

        • SimplePhysics
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          2
          ·
          1 year ago

          How? Currently, waterproofing works by slathering every crack and crevice in a sea of glue. Glue and easily replaceable batteries don’t mix.

          • ericswpark@lemmy.ml
            link
            fedilink
            English
            arrow-up
            9
            ·
            1 year ago

            The S5 had waterproofing with a removable back using gaskets. (Granted, the design was fugly, but that wasn’t the fault of the waterproofing measures. Someone at Samsung loved bandaids) If the S5 could do it, I suppose other manufacturers could achieve the same thing with rubber gaskets. I mean, other waterproof gadgets like dive computers use gaskets on their port covers and what not, so I fail to see why it wouldn’t work with battery compartments.

            • SimplePhysics
              link
              fedilink
              English
              arrow-up
              3
              ·
              1 year ago

              Huh, that could work pretty well! Gaskets would need to be secured and sealed well though, and I fail to imagine what an iPhone or any other modern device would look like with a removable battery lol.

      • acupofcoffee@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        arrow-down
        1
        ·
        1 year ago

        This. My sister killed multiple phones per year until she went to phones with good waterproof ratings and subsequently were better sealed.

        She hasn’t killed one since. That’s a lot less waste overall than before.

        I’m not saying this is bad because of that, but I think it’s something people overlook.

        • theangryseal@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          My first iPhone was in my coat pocket at work. I picked up a bottle of beer that was juuuuust cracked enough that it would split around the middle from the slightest bump but not enough that the liquid would leak.

          I stuck it under my arm to carry it and it split and spilled into my pocket. Not a lot made it in there but the phone never powered on again.

    • Muddybulldog@mylemmy.win
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      My Nextel back in the 90s had the same type of extended battery. Thick as hell by today’s standards but it didn’t actually fit better or worse in my pocket or my hand. Also didn’t feel like I needed an external case just because it might slip out of my hand at any second.