• @[email protected]
    link
    fedilink
    21 month ago

    Currently have windows booted to partition my drive and make space for a full Linux install, so I can’t do that command right away. here’s an inxi -Fxz command though from before, does this help any?

    inxi -Fxz System: Kernel: 6.5.0-14-generic x86_64 bits: 64 compiler: N/A Desktop: Cinnamon 6.0.4 Distro: Linux Mint 21.3 Virginia base: Ubuntu 22.04 jammy Machine: Type: Laptop System: HP product: HP Laptop 15-fc0xxx v: N/A serial: <superuser required> Mobo: HP model: 8B2F v: 52.42 serial: <superuser required> UEFI: AMI v: F.10 date: 12/21/2023 Battery: ID-1: BAT0 charge: 40.8 Wh (100.0%) condition: 40.8/40.8 Wh (100.0%) volts: 13.0 min: 11.2 model: HP Primary status: Full CPU: Info: quad core model: AMD Ryzen 5 7520U with Radeon Graphics bits: 64 type: MT MCP arch: Zen note: check rev: 0 cache: L1: 256 KiB L2: 2 MiB L3: 4 MiB Speed (MHz): avg: 1318 high: 2302 min/max: 400/4384 cores: 1: 1709 2: 400 3: 1428 4: 2302 5: 1510 6: 400 7: 1397 8: 1405 bogomips: 44716 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm Graphics: Device-1: AMD vendor: Hewlett-Packard driver: amdgpu v: kernel bus-ID: 03:00.0 Device-2: Chicony HP True Vision HD Camera type: USB driver: uvcvideo bus-ID: 5-1:2 Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa gpu: amdgpu resolution: 1366x768~60Hz OpenGL: renderer: GFX1036 (gfx1036 LLVM 15.0.7 DRM 3.54 6.5.0-14-generic) v: 4.6 Mesa 23.0.4-0ubuntu1~22.04.1 direct render: Yes Audio: Device-1: AMD vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 03:00.1 Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard driver: snd_pci_acp6x v: kernel bus-ID: 03:00.5 Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 03:00.6 Sound Server-1: ALSA v: k6.5.0-14-generic running: yes Sound Server-2: PulseAudio v: 15.99.1 running: yes Sound Server-3: PipeWire v: 0.3.48 running: yes Network: Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852be v: kernel port: f000 bus-ID: 02:00.0 IF: wlp2s0 state: up mac: <filter> Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-2:2 Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2 Drives: Local Storage: total: 491.96 GiB used: 6.2 MiB (0.0%) ID-1: /dev/nvme0n1 vendor: Samsung model: MZVL4512HBLU-00BH1 size: 476.94 GiB temp: 28.9 C ID-2: /dev/sda type: USB model: General USB Flash Disk size: 15.02 GiB Partition: ID-1: / size: 3.5 GiB used: 305.5 MiB (8.5%) fs: overlay source: ERR-102 ID-2: /var/log size: 11.82 GiB used: 6.2 MiB (0.1%) fs: ext4 dev: /dev/sda3 Swap: Alert: No swap data was found. Sensors: System Temperatures: cpu: 47.0 C mobo: 20.0 C gpu: amdgpu temp: 48.0 C Fan Speeds (RPM): cpu: 0 fan-2: 0 Info: Processes: 300 Uptime: 34m Memory: 7 GiB used: 2.9 GiB (41.5%) Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2121 Shell: Bash v: 5.1.16 inxi: 3.3.13

    • @[email protected]
      link
      fedilink
      4
      edit-2
      1 month ago

      This laptop seems to use ALC236, which seems to have a lot of problem on linux. If you search on the web, people seems to have different issues with different fixes on various laptop with ALC236. I’m not quite sure what’s the issue in your case, but searching for "ALC236" linux mic might yield some relevant results, such as this one. Most solutions are probably not applicable unless you install linux permanently on your disk first though.

      • @[email protected]
        link
        fedilink
        21 month ago

        I only just realized my previous comment formatted like total ass, I’m so sorry. I’ll check it out, but it seems like I fucked up the Linux install somehow, to the point where it says “something went seriously wrong” in the BIOS before shutting my PC off. I have no idea what I did wrong since I didn’t even touch the flash drive it was on.

        • @[email protected]
          link
          fedilink
          31 month ago

          I only just realized my previous comment formatted like total ass

          No problem since there is a “view source” button on lemmy which show the comment in its original formatting.