So I was attempting to install kevinakasam’s belt mod and I’m fairly sure I stripped the thread that holds the M4 screw in the outer right side of the X axis profile (the side without the extruder attached to the tensioner). How screwed am I? Could I get away with trying Loctite red?
Edit: Thanks a ton everyone, I’ll keep you all up to date when I try to finish the project this weekend!
Don’t forget cutting oil for tapping. In a pinch any oil or thin grease will work. I think that screw position was pretty short depth, but if you seize and snap a tap in the extrusion it will be a shit time even got a shallow home. I wanted to put the picture of a tap snapped flush with one of the end holes but I guess it was on my old phone. I got it out with a screw extractor but it was really hard to drill the pilot hole, and didn’t seem like it would work at first.