Nah, reverse engineering board and restoring soldering points when you burn them out is hardcore, restoring board traces is hardcore, restoring flex pcb is hardcore, reball is really easy when you get your practice, speaking from experience, now I’m learning to do hardcore part on those boards that was dead
I started that way too, way to go, only thing you gotta do is don’t give up, i mean, sometimes you’ll go really slow, but just don’t stop doing what you doing and you’ll grow
That’s hardcore
Nah, reverse engineering board and restoring soldering points when you burn them out is hardcore, restoring board traces is hardcore, restoring flex pcb is hardcore, reball is really easy when you get your practice, speaking from experience, now I’m learning to do hardcore part on those boards that was dead
Meanwhile I’m over here playing in the through-hole kiddie pool or dead-bug handwiring keyboards.
SMD is way less scary than I thought! It’s best if you spin your own board though. Passives and SOICs are piss easy just with a hot poker and tin.
I started that way too, way to go, only thing you gotta do is don’t give up, i mean, sometimes you’ll go really slow, but just don’t stop doing what you doing and you’ll grow