DJI, which nearly everyone knows as the drone company, made the jump into the electric mountain bike (eMTB) sector this year with the DJI Avinox Drive System. We just wanted to show you the clever inner workings of the setup, which brings some unique features to the table.
I think you’re spot on, since using a random power/torque/rpm calculator online, an 85 Nm mid-drive motor rotating at a reasonable crank cadence of 80 RPM yields a power output of 710 W. That’s just shy of the max power regulation in the USA for ebikes, at 750 W. And motors can definitely go faster than 80 RPM.
Mid-drive motors could probably be built with even more torque, but because electric motors maintain near-constant torque through most of their RPM range, the motor controller would have to perform more current limiting at the higher RPMs to stay under the legal power limits. So there’s less benefit, unless someone really badly wants more low-RPM torque.
At that point, though, other parts of the bicycle drivetrain might start disintegrating under such forces.
My Tangent snapped a Shimano XT chain in less than 1000km. I think that system could reach 200Nm peak torque. If I remember correctly it could peak over 2.5kW when unlimited. I had to switch to stronger chains and limit the torque to stop it from eating metal. That’s easier these days since there are stronger ebike-specific drivetrain components from Shimano and others. 😂 But I don’t ride that anymore.