DJI claims the decision “aligns” with the FAA’s rules.
  • potatopotatoEnglish
    16·
    2 个月前

    Just get the lead free solder and no clean flux, it’s much less cancer

      • potatopotatoEnglish
        9·
        2 个月前

        Oh 100% magic. And SMT hot air soldering is voodoo magic

    • lud@lemm.eeEnglish
      51·
      2 个月前

      Yeah lead free solder is perfectly fine.

      Where I live, lead solder is even illegal to sell and buy unless you have a permit which is impossible to get for individuals

      • piecat@lemmy.worldEnglish
        3·
        2 个月前

        Lead free sucks ass and you can pry my leaded solder from my cold dead hands.

        Seriously just wash your hands.

          • piecat@lemmy.worldEnglish
            4·
            2 个月前

            Fumes don’t contain lead, it’s not nearly hot enough. Those fumes are flux burning.

            • lud@lemm.eeEnglish
              1·
              2 个月前

              That’s good.

              But I still don’t get why someone would willingly use lead when lead free works great.

              I mean the RoHA for example exist for good reason.

              • piecat@lemmy.worldEnglish
                1·
                2 个月前

                Leaded is objectively better for everything except health/pollution. Which is the point of RoHS.

                Leaded solder has a lower melting point, flows much better, easier to visually see bad solder joints, and doesn’t form whiskers. Also less brittle, so cracked joints are less likely.

                • lud@lemm.eeEnglish
                  11·
                  2 个月前

                  Sure but it works well enough if you have just a little skill.