• admin
    link
    fedilink
    English
    arrow-up
    2
    ·
    3 hours ago

    Maybe the PA vibe can be created on post with the source material.

    • towerful@programming.dev
      link
      fedilink
      English
      arrow-up
      2
      ·
      20 minutes ago

      If the live engineer is crappy and causes feedback or echo (like on the brink of feedback) that goes straight to records. There is no way to fix it in post (well, no decent way, and takes ages to dial in something mostly acceptable ).
      If it’s a “feel of being live” that’s required in post, most lavs are omni so will pick up a bunch of atmo noise. It will likely feel live by virtue of being live. I imagine they have some mics on the camera as well for atmo.

      Maybe the records aren’t set up for a feed from the sound desk. Maybe the sound desk isn’t able to provide a clean feed.
      The lav mic is probably wireless, with the receiver direct into a camera. They don’t have any gain-before-feedback physics to contend with, so they can gain it however they want.
      And if they are doing any spots not in front of the mic on stage (or a mic through the sound desk), they will need a mic anyway. If they always use the same mic, then the sound will be consistent.

      Better to have an independent feed.

      But who cares, the guy is a piece of shit. Any videos he’s gonna put out are not for the benefit of humanity

      • admin
        link
        fedilink
        English
        arrow-up
        1
        ·
        5 minutes ago

        who cares, the guy is a piece of shit. Any videos he’s gonna put out are not for the benefit of humanity.

        At least history books of the future will have plenty of material to work with.

      • admin
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 minutes ago

        I’m not THE admin, I am A SysAdmin.