Currently, my desktop computer has two storage devices attached: one 1TB NVME SSD, which has both Windows 10 and Linux Mint 21.2 installed on it (Each OS getting ~ 500 GB), and a 1TB SATA hard drive mostly used for Timeshift backups of the Linux Mint partition (Including my Home folder, for the record).

Later today I’m expecting to receive two more 1TB SSDs. When I’ve finished the upgrade process, I’d like to have my Linux Mint installation transferred to a RAID 1 array comprised of the two new drives and expand the Windows 10 partition to take up the whole existing SSD.

My current plan for doing this is to use my existing installation USB drive to install a fresh Linux Mint 21.1 installation on the two new drives, then use Timeshift to ‘restore’ my most recent backup from the existing installation. Is there a better way of going about this that I’m not already aware of?

  • @themoonisacheese
    11•11 months ago

    Why not DD? Dd is agnostic to anything, just copy over the entire partition and you’re golden

    • t0m5k1
      5•11 months ago

      Man I always forget about dd and jump to gparted.

    • @[email protected]
      2•11 months ago

      dd is good if the destination disk is equal or bigger, unless you are brave enough to shrink the source partition.

      if you are moving to a smaller disk for whatever reason (hdd to sdd) then you need to fallback to a different method, which takes us back to cp/rsync.

    • Eager EagleEnglish
      1•11 months ago

      I’m always hesitant to use the “disk destroyer”, even as a regular user. rsync does a good job and it’s maybe even more agnostic than dd since it doesn’t really care about the partition size, as long as all data fits.

    • lemmyvoreEnglish
      1•11 months ago

      Because cat and cp are faster if you don’t pick a good block size for dd.