• zarquon
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    I’ve been doing that style thing for years and it’s great. Have to say I disagree with his process a bit though. I don’t have the space or time to let it carbonate for a few days.

    I use a 1.5gal keg. Dump an inch or two of ice in the bottom and fill to about 1 gallon with water. My co2 regulator is set at 50psi. Connect co2 and shake for about a minute. You’ll hear it stop bubbling. Leave connected on counter for 15 minutes. Light shake every time you feel like it for those minutes. Disconnect the co2 and put the keg in the fridge. Usually I leave it for another 30 minutes or so before having some.

    No need to leave the co2 connected to serve with that pressure and space. You can be drinking the seltzer after that first minute if you want but it is better with that extra time. No patience for days.

    • Shayeta@feddit.deOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’ve been looking for a solution that uses a smaller cooling unit, do you maybe happen to know what a setup like that might look?

      • zarquon
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        3rd try today trying to submit a reply. Apologies if they’re there but I’m I’m just not seeing them

        Small kegs aren’t practically much bigger then regular 1 gallon jugs. It’s right in the family kitchen fridge with all the other food. The co2 cylinder is only needed while carbonating and is otherwise stored in a cabinet. No co2 line is needed while using.

      • zarquon
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Photo for reference. Keg was $70. Don’t recall what the co2 setup was. Bought that in local store.