Minwax has ruined enough of my projects. I’m looking for recommendations for wood finishing products, particularly stains and wiping varnishes, that actually work, are readily available on the East coast of the United States, and are not manufactured by Sherwin-Williams.

  • Captain AggravatedOP
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    The process of staining wood as it has been explained to me:

    1. Sand a lot
    2. Apply a generous coat of the stain. Just slop it right on there. Put it on thick as paint.
    3. Leave it on the surface for several minutes, Minwax likes the phrase “five to fifteen minutes.” To let it soak into the wood.
    4. Wipe off whatever excess.
    5. Allow it to dry, ie allow whatever solvent that carried the pigment onto/into the wood to flash off. Minwax provides no guidance on how long this should be, just “Until fully dry.”
    6. Apply some protective coating be it lacquer, varnish, urethane, shellac, epoxy, shrink wrap, whatever.

    After waiting an entire day, I could still wipe stain off with a clean rag, and applying a wiping varnish took a lot of the stain back off.

    Now I might be some damn fool idealist, but a coating that is specifically intended to be applied before/under another coating should survive the application of that second coating. I mean I know society doesn’t actually work, but come the fuck on.

    • IMALlama@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      What species of wood? Some species of wood do as you’re describing, but others are less prone to it. How long did you have the wood and where did you get it from? I’ve also experienced this on newer-to-me wood from the big box stores, but it seems to improve the longer the wood sits in my wood pile. I suspect it’s because the wood isn’t dry enough.

      Note that I tend to buy stain from whomever is closest and this is something I’ve observed across brands.

      • Captain AggravatedOP
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Birch ply wood and yellow pine. Thing is, there aren’t many other species of wood I really want to stain, most everything else I work with like cherry or walnut I want for its natural color.

        • IMALlama@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Pine is a harder to stain wood in my experience. Maybe there’s a treatment you can use ahead of time? I’ve had decent luck with shellac on pine and you can dissolve dyes in it.

        • hank_and_deans@lemmy.ca
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          This is likely the issue. Both of those woods are famously incompatible with normal stains. Gel stains are what most people recommend for those woods. I have also had decent luck with Saman stains with the right preparation and great results with Omnia natural oil.

          • Captain AggravatedOP
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            🙄 Man if there’s two species I want to stain, it’s those. Like think about how abundant pine is, you can get it at any hardware store right? I live in a pine forest and I know a local sawyer. Yellow pine is abundant and cheap here…and kinda bland looking.

            Guess I’ll try out some gel stain, I’ve never used it before. Don’t know anything about it.