@[email protected] to [email protected]English • 8 months agoIf it works, it works...lemmy.worldimagemessage-square22fedilinkarrow-up1114arrow-down13file-text
arrow-up1111arrow-down1imageIf it works, it works...lemmy.world@[email protected] to [email protected]English • 8 months agomessage-square22fedilinkfile-text
minus-square@[email protected]linkfedilinkEnglish3•edit-28 months agoI oddly usually have the other problem, my prints stick too good, the bottom of the print is white (though it is black PLA+) and it sometimes deforms my magnetic mat doohickey while trying to pry it free. Drives me crazy.
minus-square@[email protected]linkfedilinkEnglish1•8 months agoI’ll try turning it up, iirc I have been running like 220° for PLA+.
minus-square@[email protected]linkfedilinkEnglish1•8 months agoI meant your extruder’s z-offset it too low not the temperature.
I oddly usually have the other problem, my prints stick too good, the bottom of the print is white (though it is black PLA+) and it sometimes deforms my magnetic mat doohickey while trying to pry it free. Drives me crazy.
Your extruder might be set too low.
I’ll try turning it up, iirc I have been running like 220° for PLA+.
I meant your extruder’s z-offset it too low not the temperature.
Ahh I can try raising it, thanks!