Hi everyone, Linux noob. I am installing Ubuntu on a Panasonic Toughbook CF-33. I was wondering if anyone had advice regarding drivers as the toughbooks have quite a few I/O ports, dual cameras, cellular antennas, and attached keyboard etc. Any advice is appreciated or even resources on where I could go to learn more about Ubuntu. Thanks everyone, take care.

  • @Verat
    link
    76 months ago

    No experience with the CF-33, but I did use a CF-30 and as far as I could tell, outside the WiFi (back when drivers for that were a problem) everything on it worked out of the box, never had any accessories that plugged into the more proprietary connectors but everything I ever plugged in worked, including RS-232

    • @Verat
      link
      46 months ago

      Do want to add, on the CF-30 when I replaced the WiFi card with a newer Intel card I had to shave off the power control mini pcie pin so that the BIOS whitelist couldnt deactivate it, no clue if they still whitelist WiFi cards in newer models or the CF-33.

      • @[email protected]OP
        link
        fedilink
        36 months ago

        Will check, this one is running an Intel Dual Band AC-8260. I won’t need to use WiFi too often (this is the laptop I bring with me on work deployments, no internet and if I run the Starlink I can put it in Ethernet mode). Thank you for your help.

        • @Verat
          link
          26 months ago

          If it isvalready equipped with an Intel WiFi card you should be good out of the box. Glad I could help!

          • @[email protected]OP
            link
            fedilink
            3
            edit-2
            6 months ago

            As of right now my I/Os are working. WiFi, mobile (gps unknown right now) but the card readers, hdmi ports etc are functioning. Forward camera works but rear still doesn’t (couldn’t get it working on win10 either, not a deal breaker) even the ambient light sensor. Any advice on getting Wine setup (I’m trying to run the Panasonic day/night to utility for a night vision/red screen mode, the only FOSS alternatives I’ve found have just been blue light blockers)?

            Edit: Thanks again!

            • @Verat
              link
              36 months ago

              As you mentioned Ubuntu’s Night light, f.lux, and Redshift all work more like a color temperature adjust than like a red only mode, I found some people mentioning if you are running X you can use xcalib to set the color channels individually, but couldnt find a tool for it, not entirely sure wine would make that function work correctly but it is worth a shot, as for wine, if the version in the package manager isnt new enough there is also a PPA for Ubuntu for more recent wine versions, but I havent used those in a long time and cant strongly advise them, YMMV in installing them and keeping the system working long term, but I was always the sort with too many PPAs so I switched to arch to not deal with that.

              Link to xcalib discussion here.