Welcome to today’s daily kōrero!

Anyone can make the thread, first in first served. If you are here on a day and there’s no daily thread, feel free to create it!

Anyway, it’s just a chance to talk about your day, what you have planned, what you have done, etc.

So how’s it going?

  • eagleeyedtiger
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    This might be a bit niche, but does anyone have some good resources on creating or setting up solar powered systems? Not as in for the house (hopefully in the future though!) Moreso just smaller projects so I can learn the ins and outs of it. I’d like to get involved in this space, but don’t really have any experience in it.

    • Dave@lemmy.nzOPM
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      I feel like there are people around that might be able to help. Probably not me… But people.

      Do you have an idea of the kind of project you’re looking at doing?

      • eagleeyedtiger@lemmy.nz
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Not really, just wanted a starting point to learn the basics. I can’t think of anything off the top of my head that would be useful. I’ll keep searching!

        • NoRamyunForYou@lemmy.nz
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          What type of scale you thinking?

          I’ve done a tiny bit of solar work on a microcontroller scale i.e., 5~20 watts of solar panel range

          • eagleeyedtiger@lemmy.nz
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Probably small to start, don’t want to invest too much yet. Trying to think of something useful for the garden or outdoor space

            • NoRamyunForYou@lemmy.nz
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              Do you think you’ll want to have a battery in your system so that you still have power when it get’s cloudy, or during the night?

              • eagleeyedtiger@lemmy.nz
                link
                fedilink
                arrow-up
                2
                ·
                1 year ago

                Nothing specific in mind yet, but I definitely want to learn about the battery storage side of things as well, so ideally yes

                • NoRamyunForYou@lemmy.nz
                  link
                  fedilink
                  arrow-up
                  3
                  ·
                  1 year ago

                  I’ve lost a lot of the links I used to have when I was looking into this stuff, but I’ll throw a few things out there in the hopes that are able to use something from the pile to search up on google etc.

                  Disclaimer, I’m typing a lot of this stuff from memory so some of it may be wrong

                  I prefer DIYing things that I can, but for anything related to power, I will purchase off the shelf components that are know to work - just to keep my risks as low as possible.

                  The basic circuit would look like this: SOLAR PANEL --> SOLAR CHARGE CONTROLLER --> BATTERY --> OUTPUT LOAD

                  Solar Panels

                  You will find a lot of different “types” of Solar Panels, but that is mostly in their rating. The bigger a solar panel, the more electricity it can generate. The ratings will usually be given in a combination of Power (Watts, W), and Voltage (Volts, V). These two are related with the following equation:

                  Power (W) = Voltage (V) * Current (I)

                  The quicker you want to charge your batteries, the more Watts you will need.

                  (You can combine Solar Panels (in either Parallel or Series) to give you more Power. Combining multiple panels may be a little bit more advanced (but not really as long as you know what your doing). I would recommend to start off with one panel, and then design and add as required https://battlebornbatteries.com/solar-panels-in-series-or-parallel/#:~:text=When you wire multiple panels,output voltages stay the same.

                  Solar Charge Controllers

                  Whatever Solar Panel you end up getting will have a rating. This is most likely going to be in Watts (W), which is a combination of the Voltage (V) and Current (I) (where Power (W) = V * I). When you measure the output of a solar panel, you will see that the Voltage fluctuates (due to clouds, orientation etc.), and hence, your overall Wattage will fluctuate.

                  For various reasons, having this type of fluctuation is not the best when your are tying to charge a battery. Hence, we use “Charge Controllers”. A Charge Controller is specific to the type of Battery you end up using (There’s a brief breakdown of some common battery types below). A Charge Controller will take the output from your Solar Panel, and will regulate what it needs to regulate, and output energy into the battery. As an example, Jaycar has a lot of different Solar Charge Controllers (They are in no way the best, but have linked them because people are familiar with them. Look for other offerings as well) https://www.jaycar.co.nz/power-batteries/solar-power/solar-charge-controllers/c/0HC?sort=popularity-desc&q

                  You will notice that there are “PWM” type and “MPPT” Solar Charge Controllers. MPPT are more expensive compared to their PWM counterparts, and with the way they work, they are basically more efficient in getting the Energy that you gather from your Solar Panel, into your Battery. PWM is still a valid option. When choosing your Solar Charge Controller, make sure they are compatible with the Voltage rating of your Solar Panels & Batteries, and that they are able to handle the amount of current your system will be pumping into the battery at max.

                  The Solar Charge controller should have Output Terminals as well, where you can connect the Load that you want to power (or you can connect them directly to the battery if your Voltage requirements are the same as your battery voltage). Here’s a User manual of a MPPT Charge Controller that also includes some diagrams as to how everything would be wired up (page 14) https://www.jaycar.co.nz/medias/sys_master/images/images/9959654293534/MP3741-manualMain.pdf

                  For the microcontroller work that I do (very lower power usage), I use these Solar Charge Controllers https://www.adafruit.com/product/4755

                  Battery Type

                  You have a few choices for different types of Batteries

                  1. Sealed Lead Acid (SLA) Batteries - These are your common car battery types. They are usually good for giving you a short burst of power, but they aren’t very energy dense (i.e., for the same physical size, other types of batteries will give you more energy/capacity). Adding to this, they cannot utilize their full rated capacity (usually good for about 50% of their rated capacity), and their rated life (counted in number of times you deplete the battery (discharge cycles)) is comparatively quite low. Per unit, they are the cheapest (but be sure to take into account, actual capacity available, and the lifespan of the battery).

                  2. Lithium Ion Batteries - These are the batteries found in our phones and most portable electronics. They are very energy dense, and you can utilize all of their capacity. They have a longer life, but they are known to catch on fire / explode when not taken care of properly. You MUST take care when using Lithium Ion batteries, and really know what you are doing. This includes ensuring you use a Battery Management System (BMS) specifically for Li-Ion Batteries. However, with proper care, the risk becomes very low.

                  3. LiFePo4 Batteries - Very similar to the above mentioned Lithium Ion (In fact these are Lithium batteries too), but they are said to be safer than Li-Ion batteries. They also have a much greater life when compared to Li-ion, but they are more expensive.

                  4. NiCad Batteries - For the same amount of energy, they are bigger than lithium based batteries. They also suffer from a “memory effect”, where if you keep charging them before they are fully depleted, your batteries capacity will decrease (as the battery “thinks” the point at which you charge is empty).

                  • eagleeyedtiger@lemmy.nz
                    link
                    fedilink
                    arrow-up
                    3
                    ·
                    1 year ago

                    Wow thanks for taking the time for the write up! The MPPT controllers are significantly more pricey, are they that much more efficient? I’m going to absorb as much as this as I can and see if I can come up with a project.

                    Can I ask what you use your microcontrollers for?

                • NoRamyunForYou@lemmy.nz
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  edit-2
                  1 year ago

                  I’ve lost a lot of the links I used to have when I was looking into this stuff, but I’ll throw a few things out there in the hopes that are able to use something from the pile to search up on google etc.

                  Disclaimer, I’m typing a lot of this stuff from memory so some of it may be wrong

                  I prefer DIYing things that I can, but for anything related to power, I will purchase off the shelf components that are know to work - just to keep my risks as low as possible.

                  The basic circuit would look like this: SOLAR PANEL --> SOLAR CHARGE CONTROLLER --> BATTERY --> OUTPUT LOAD

                  Solar Panels

                  You will find a lot of different “types” of Solar Panels, but that is mostly in their rating. The bigger a solar panel, the more electricity it can generate. The ratings will usually be given in a combination of Power (Watts, W), and Voltage (Volts, V). These two are related with the following equation:

                  Power (W) = Voltage (V) * Current (I)

                  The quicker you want to charge your batteries, the more Watts you will need.

                  (You can combine Solar Panels (in either Parallel or Series) to give you more Power. Combining multiple panels may be a little bit more advanced (but not really as long as you know what your doing). I would recommend to start off with one panel, and then design and add as required https://battlebornbatteries.com/solar-panels-in-series-or-parallel/#:~:text=When you wire multiple panels,output voltages stay the same.

                  Solar Charge Controllers

                  Whatever Solar Panel you end up getting will have a rating. This is most likely going to be in Watts (W), which is a combination of the Voltage (V) and Current (I) (where Power (W) = V * I). When you measure the output of a solar panel, you will see that the Voltage fluctuates (due to clouds, orientation etc.), and hence, your overall Wattage will fluctuate.

                  For various reasons, having this type of fluctuation is not the best when your are tying to charge a battery. Hence, we use “Charge Controllers”. A Charge Controller is specific to the type of Battery you end up using (There’s a brief breakdown of some common battery types below). A Charge Controller will take the output from your Solar Panel, and will regulate what it needs to regulate, and output energy into the battery. As an example, Jaycar has a lot of different Solar Charge Controllers (They are in no way the best, but have linked them because people are familiar with them. Look for other offerings as well) https://www.jaycar.co.nz/power-batteries/solar-power/solar-charge-controllers/c/0HC?sort=popularity-desc&q

                  You will notice that there are “PWM” type and “MPPT” Solar Charge Controllers. MPPT are more expensive compared to their PWM counterparts, and with the way they work, they are basically more efficient in getting the Energy that you gather from your Solar Panel, into your Battery. PWM is still a valid option. When choosing your Solar Charge Controller, make sure they are compatible with the Voltage rating of your Solar Panels & Batteries, and that they are able to handle the amount of current your system will be pumping into the battery at max.

                  The Solar Charge controller should have Output Terminals as well, where you can connect the Load that you want to power (or you can connect them directly to the battery if your Voltage requirements are the same as your battery voltage). Here’s a User manual of a MPPT Charge Controller that also includes some diagrams as to how everything would be wired up (page 14) https://www.jaycar.co.nz/medias/sys_master/images/images/9959654293534/MP3741-manualMain.pdf

                  For the microcontroller work that I do (very lower power usage), I use these Solar Charge Controllers https://www.adafruit.com/product/4755

                  Battery Type

                  You have a few choices for different types of Batteries

                  1. Sealed Lead Acid (SLA) Batteries - These are your common car battery types. They are usually good for giving you a short burst of power, but they aren’t very energy dense (i.e., for the same physical size, other types of batteries will give you more energy/capacity). Adding to this, they cannot utilize their full rated capacity (usually good for about 50% of their rated capacity), and their rated life (counted in number of times you deplete the battery (discharge cycles)) is comparatively quite low. Per unit, they are the cheapest (but be sure to take into account, actual capacity available, and the lifespan of the battery).

                  2. Lithium Ion Batteries - These are the batteries found in our phones and most portable electronics. They are very energy dense, and you can utilize all of their capacity. They have a longer life, but they are known to catch on fire / explode when not taken care of properly. You MUST take care when using Lithium Ion batteries, and really know what you are doing. This includes ensuring you use a Battery Management System (BMS) specifically for Li-Ion Batteries. However, with proper care, the risk becomes very low.

                  3. LiFePo4 Batteries - Very similar to the above mentioned Lithium Ion (In fact these are Lithium batteries too), but they are said to be safer than Li-Ion batteries. They also have a much greater life when compared to Li-ion, but they are more expensive.

                  4. NiCad Batteries - For the same amount of energy, they are bigger than lithium based batteries. They also suffer from a “memory effect”, where if you keep charging them before they are fully depleted, your batteries capacity will decrease (as the battery “thinks” the point at which you charge is empty).