Anybody see a 48 port managed 2.5 Gig ethernet switch for reasonable pricing yet? it seems like these are still either thousands of dollars or sold for chinese market without appropriate certificatiosn to be plugged into the north american electric grid. Any help would be appreciated (even better if it has 2-4 SFP+ 10 gig ports on it)
All I see around is old Cisco enterprise stuff and 1000 would be a low price for that. Not to mention the potential for quite loud fan noise.
Unifi has one with 10 gig uplinks for the same price as used Cisco stuff and it has poe also. Still 1600 bucks though.
2.5 is still really new in the networking space and nobody has hit economies of scale yet. I very much also want to build out my home LAN to be entirely 2.5g compatible since 1g is limiting for my NAS use case (video storage), 10g is overkill and not supported by my client devices, and I only need 16/24 ports. but good God the hardware just isn’t reasonable yet.
You pretty much have to bite the bullet if you really want 2.5 right now. What might honestly be worthwhile is finding a used enterprise 1g switch with the number of ports you need, and will still be “enough”, as those can be had for only a couple hundred dollars. Sit on that for 2-3 years until the 2.5g and 5g hardware market starts to fill out and you can decide how badly you need 2.5g then
Yeah I would also suggest to stick with 1g switches and if the need for bandwidth is required then create a LAG. 2.5g is currently just finding adoption at this point.
Oh yeah that’s a good idea too. Sure any one client device will be limited to 1g but your NAS could use a super cheap multi-port ethernet card to get 2 or 4g bonded link speeds so it can serve multiple devices at full speed.
2.5 and 5 gig are also very much consumer grade speeds, and you don’t really find 48 port consumer grade switches. Enterprises largely don’t give a shit about 2.5 and 5 so there’s no demand to make something like that.
Yea, I think 2.5G is really searching for a market, that may not exist. For home use, 1Gbit is in general plenty fast enough, and maxes out most US customers Internet too. For enterprise use 10G is common and cheap. The cards to get an SFP+ port into any tower or server is just really small. Enterprise is considering how to do 100G core cheaply enough, and looking for at least 25G on performance servers, if not also 100G in some cases. If you’ve got the budget you can roll 400G core right now in “not insane pricing”.
2.5G to the generic office (that might well be remote) is likely re-wiring and unnecessary. And that’s if you don’t find ac WiFi sufficient, i.e. sub 1G.
The biggest up side to 2.5 gig and 5 gig is that they can do their speeds on existing cat 5e and cat 6 cables at their full 100 meters. And I think 2.5 gig poe is dirt cheap. Outside of reusing existing cables WiFi 6 and 6e APs are their only real use since they can peak just over 1 gbit speeds.
I will have to see that. I would be concerned about pushing cat5e that fast. I am not sure about cat6, but again that speed is not fast enough to buy new cards for the computers and if we were buying cards I guess the 10G fiber cards are likely cost competitive now that servers are dumping them as obsolete.
In terms of value old 10 gig is much better than new 5 gig and even 2.5. It’s just most 10 gig stuff has crazy loud fans and use a ton of power.
Noise doesn’t matter in a data center which is where the switches live. The power use might be more than a 1gbit, but they’re in line with any dual power enterprise switch really.
If you want decent prices, you will have to look for used 10G SFP+ switches. They will be noisy and I certainly wouldn’t want one in my house though. 2.5G is much more expensive and there isn’t much used equipment available.
I’d hesitate to call it truly enterprise, but I’ve used the 24 port/10Gbe version of these in a datacenter. Not many issues to write home about - seems to handle vlanning pretty well.
Has 10Gbe uplinks, US power, and PoE+. Probably access to a fancy dashboard too.
$1600 is probably as cheap as you’re getting.
Edit: Oh yeah, they’re probably not dual attached, and the ‘redundant power supply’ (RPS) is a separate appliance, which I consider kinda bullshit, that takes up another U.
I’ve had no trouble with actual switching performance though fwiw.
Edit 2: They’re probably compatible with the AR mobile app, which is hella cool, and somewhat useful in customer sites.
You can always trunk 1g connections together. I picked up an old Cisco 3760G poe+ for 20 bucks at the gov surp. Port channels ahoy!
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters AP WiFi Access Point NAS Network-Attached Storage PoE Power over Ethernet Unifi Ubiquiti WiFi hardware brand
4 acronyms in this thread; the most compressed thread commented on today has 15 acronyms.
[Thread #325 for this sub, first seen 2nd Dec 2023, 02:25] [FAQ] [Full list] [Contact] [Source code]
deleted by creator
deleted by creator
