When I first started getting into SFF cases, I was in a rush to get the most affordable thing I could find, which ended up being the K39 + 500W Flex ATX PSU combo off Superbuy.
This ugly little white case showed up and I immediately disliked it. Since then, I’ve spray painted everything black, printed new grills and made a Thor Zone Borg style stand (since it didn’t come with feet)
The graphics card fan crapped out on me a while ago as well, so I reprinted the shroud and zip-tied in the IS-60 fan that’s controlled with Fan Control V159.
I’ve been waiting for the Superbuy branded PSU to crap out but it’s holding strong after 2 years. If I had to do it again, I’d probably go with a Velka 3 or Densium 4. It’s not the prettiest machine but I’ve put a lot of work into it to make it something I’m happy to have on my desk.
Specs:
- CPU: Intel i9-9900K
- Cooler: ID-Cooling IS-60, swapped fan for a Noctua
- GPU: Gigabyte GTX 1050Ti, custom shroud with IS-60 cooling fan
- RAM: 32 GB
- PSU: Superbuy 500W Flex
Looks clean, nice job! Also I had no idea the concept for this community was a thing and I’ve been interested in moving to a smaller PC case for a while so I’m excited to see a community on the topic.
Thanks! The people at r/sffpc were super helpful, I’m hoping that carries over here. I’ve never moderated a community before, so I’m happy to see it grow. I’ll probably start a thread for resources eventually, so keep an eye out if you want advice for parts and cases!
My first SFF case (idon’t count the node 202 or rvz01 i had before) was a K39v2. But now i switched to a D4. I always liked the K39 and am excited for every build i see of it.
