The process of mass-producing LED Signboard with high-performance 3D printers. LED signboard in KoreaCompany homepage and sales site: https://www.smart3dsig...
I love seeing manufacturing and 3d printing in mfg settings. I work in mfg (not 3d printing, sadly).
Put really cool LED tape on that I would love to have the source for
This stuff is available from Amazon and probably cheaper on Aliexpress. I have a roll of white LEDs with a sticky backing, which is a lot like the stuff used in the video. I also recently ordered this stuff which is a UVA LED with a sticky backing. My plan being to try and pair it with glow in the dark PLA to get a nice glow effect.
There are a few variety of that LED strip, and I use em for all sorts of junk. Just built a big backlight piece for my living room with maybe $80 worth. Look for WS2812 and you’re on your way to multiple varieties using the same chips!
This is likely a Piocreat Creatwit K8 printer (Creality sister company) even though it’s labeled Smart3D.
What soluble adhesive to use depends. PVA slurry is certainly an option.
The resin is also there to help with light diffusion.
Not into sign making but I guess the colored front is required as epoxy resin yellows over time and with colored resin this isn’t visible. There are other options than epoxy resin but those cost more.
Those LED tapes aren’t special. Search for bendable LED strip.
This is a great video. Here is my best guess for the process, but I’m not a 100%
This stuff is available from Amazon and probably cheaper on Aliexpress. I have a roll of white LEDs with a sticky backing, which is a lot like the stuff used in the video. I also recently ordered this stuff which is a UVA LED with a sticky backing. My plan being to try and pair it with glow in the dark PLA to get a nice glow effect.
That sounds like a cool project. If you feel like sharing pics when you’re done, I’d loved to see them.
There are a few variety of that LED strip, and I use em for all sorts of junk. Just built a big backlight piece for my living room with maybe $80 worth. Look for WS2812 and you’re on your way to multiple varieties using the same chips!
This is likely a Piocreat Creatwit K8 printer (Creality sister company) even though it’s labeled Smart3D.
What soluble adhesive to use depends. PVA slurry is certainly an option.
The resin is also there to help with light diffusion.
Not into sign making but I guess the colored front is required as epoxy resin yellows over time and with colored resin this isn’t visible. There are other options than epoxy resin but those cost more.
Those LED tapes aren’t special. Search for bendable LED strip.