• DumbAceDragon
    link
    fedilink
    arrow-up
    7
    ·
    2 年前

    From what I can recall, the reason gold plating is so common is because it protects the connector from wear and corrosion.

    • Ketchup@reddthat.com
      link
      fedilink
      arrow-up
      5
      ·
      2 年前

      That’s right, but it’s mostly good for a more permanent connection. Like a patched music console. Fun fact. Chrome nickel ends for gigging musicians are typically better since they are constantly being plugged and unplugged. If you use gold ends on cables you’re constantly disconnecting and reconnecting you will just wear away the plating more quickly.

  • areyouevenreal@lemmy.fmhy.ml
    link
    fedilink
    arrow-up
    5
    ·
    2 年前

    This is a bad example. Aux cables use analog signals therefore signal integrity actually matters for sound quality. If this was a cable used for digital signals like SPDIF of HDMI or USB then it wouldn’t effect quality; that being said using gold or another coating (someone mentioned chrome nickel) will help with reliability and corrosion over time.

    • hansvonwurst @lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      2 年前

      It’s actually a good example. Putting aside corrosion, there is no difference in sound (that’s what the meme is about). Coming to corrosion: oxidation will increase the contact resistance which is not frequency dependent. So, at max, it will make the signal slightly smaller but not “worse”.

      Actually, mixing gold-plated plugs and tinned receptacle contacts is even worse considering the mismatch in contact resistance