I recently stated out loud that my homelab was stable, and now my UPS is posting less than 30 minutes of estimated normal load. What’s everyone using as a UPS?

I’ve been rocking the aptly-named CyberPower OR1500LCDRT2U for the past few years. Should I just replace the cells or upgrade the whole unit?

  • poVoq@slrpnk.net
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    Probably just a case of replacing the batteries, but if you want to think out of the box: there are some hybrid inverters for solar systems that offer a UPS mode. So you could combine a home solar system with modern lithium batteries with your homelab needs for a better UPS.

    • shnizmuffin@lemmy.inbutts.lolOP
      link
      fedilink
      English
      arrow-up
      9
      ·
      1 year ago

      This is the $10k solution to the $100 problem I was looking for, thank you for the idea.

      “My dear significant other, the server’s battery backup is dying – I’ll be on the roof.”

    • e_t_@kbin.pithyphrase.net
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      The primary concern is switchover time. A purpose-built UPS can switch in about 10 microseconds. Those large “solar generator” battery packs switch in about 30 microseconds. That might be fast enough, but it’s not guaranteed to be fast enough like a UPS is.

      • poVoq@slrpnk.net
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        1 year ago

        Well, if that is really a concern, you can keep the old UPS with not so good batteries still connected to cover that 20 microseconds difference.

        But it is unlikely to matter in a homelab.

        • litchralee
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          1 year ago

          Did y’all mean to say milliseconds, and not microseconds? Sub-millisecond power loss would be less time than one AC cycle, whether 50 or 60 Hz.

          Anyway, I do recall seeing some enterprise gear specifying operation through a drop in AC power lasting two cycles, precisely to cover the switch to UPS power, at least for 60 Hz power. So up to 33 milliseconds. A cursory search for hybrid inverters online shows a GroWatt with “<20ms” switchover, so this may be fine for servers and switches, when the inverter is operated without any solar panels.

          For consumer grade equipment, all bets are off; some cheaper switch-mode power supplies do very weird things under transient conditions.

    • litchralee
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      I second this idea, if it’s feasible. As noted elsewhere in this thread, the lead-acid batteries in UPS units have a limited lifespan, even if not regularly drained. Solar and off-grid enthusiasts have determined that parity between overall lifetime cost of lead-acid versus lithium batteries was reached years ago, and now it’s firmly in lithium’s favor, mostly due to the greater number of recharge cycles.

      Contraindications for lithium batteries would include:

      • high local costs for lithium battery packs
      • lack of space for the hybrid inverter, as they’re usually not rack-mountable
      • the homelab drops below 0 C (32 F), in the specific case of LiFePO4 cells

      That said, breathing life into old equipment is usually more environmentally friendly than acquiring new equipment.