Okay i have a strange problem. Im running a nextcloud instance with linuxserver.io docker. And every night at 03:00 AM i get 100% load. And it disapears when i restart the docker.

I have entered docker shell when the high loads occurs and i see that the process is php /app/www/public/cron.php that is causing the high load.

Nothing i the logs shows errors and i have checked all settings. How can i continue the search of what making the high load?

I cant trigger the high load from anything else execpt waiting until 03:00 AM.

  • denshirenji@lemmy.worldEnglish
    6·
    11 months ago

    So without knowing much about you setup, I would say that there is a cronjob set to run in the background at 3am. You can enter the docker shell and check crontab and see what is scheduled to run. crontab -e to edit for the current user. crontab -l to check the list of configured tasks. Keep in mind that it is by user so any user may be the one with the cron configured, I suppose. It is also possible that the cron is set up on the docker host as well. So maybe try to check crontab on the host as well.

    Hopefully, this is helpful. I am not an expert.

    • ZebraGooseOPEnglish
      1·
      11 months ago

      Thanks!

      I checked crontab -l

      root@f6449ccdbac8:/#crontab -l do daily/weekly/monthly maintenance min hour day month weekday command */15 * * * * run-parts /etc/periodic/15min

      0 * * * * run-parts /etc/periodic/hourly

      0 2 * * * run-parts /etc/periodic/daily

      0 3 * * 6 run-parts /etc/periodic/weekly

      0 5 1 * * run-parts /etc/periodic/monthly

      And under daily i found logrotate:

      !/bin/sh

      if [ -f /etc/conf.d/logrotate ]; then . /etc/conf.d/logrotate fi

      if [ -x /usr/bin/cpulimit ] && [ -n “$CPULIMIT” ]; then _cpulimit=“/usr/bin/cpulimit --limit=$CPULIMIT” fi

      $_cpulimit /usr/sbin/logrotate /etc/logrotate.conf -s /config/log/logrotate.status EXITVALUE=$? if [ $EXITVALUE != 0 ]; then /usr/bin/logger -t logrotate “ALERT exited abnormally with [$EXITVALUE]” fi exit 0

      But i dont understand what could be wrong 🤔 maybe something with the logfile which is in a bind mount?

      I will investigate further!