I didn’t notice the warning at the pump about B20 and to check the owner’s manual until after I had already completely filled the tank, I filled it 80% full with this stuff!

How is this going to affect the engine? I’m mentally preparing for the worst.

I’m also imagining: Should I siphon this out of my tank and put it into gas cans and advertise it for sale? It cost $105 🤦‍♀️😭 I’m imagining if I try to resell it for quite a bit less than that, I’d be helping someone out and they’d be helping me out to get rid of this. ☣️

  • Everythingispenguins@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    11 months ago

    Don’t worry man, just don’t do it again. If I remember correctly bio diesel has a little more oxygen in it than regular diesel. This can shorten the life of some rubber components in the fuel system, but that is over years not just one tank.

  • sir_pronoun@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    11 months ago

    So I’m just a hobbyist mechanic (with a technical background though), but I absolutely wouldn’t worry about this.

    Of course you should follow the guidelines from the manufacturer, but this is very far from using super vs diesel, for example.

    I would just drive with that tank, no questions or worry.

    As I said, just an amateur opinion, though.

    • LemmyKnowsBest@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      11 months ago

      Thank you for the resource. also how do I find out the specifics of my vehicle (T1N, NVC3, or VS30)? Where would it be written anywhere under the hood? The owner’s manual that came with my vehicle when I bought it brand new is very generic and covers all different kinds of sprinters which pisses me off. My owner’s manual is not specific to my own specific vehicle.

      which is what I’m dealing with right now because someone suggested I keep a new fuel filter on hand just in case, but I’ve got different options based on the specifics of my vehicle, All I know is that it’s a 2018 and I don’t even know if it’s a 4 cylinder or a 6 cylinder 🤦‍♀️ How do I determine if my vehicle is 4 or 6 cylinder?

      • CrayonRosary@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        11 months ago

        Here, I found this thread for what it’s worth:

        SPOILER: The occasional tank of B20 is fine. Don’t worry about it.

        https://sprinter-source.com/forums/index.php?threads/116488/

        Read the entire thread, but this comment is particularly informative:

        https://sprinter-source.com/forums/index.php?threads/116488/page-4#post-1357147

        Original reply:


        Go to the forums and look at the year ranges. They’re right in the forum secyion titles. A 2018 would be an NCV3.

        https://sprinter-source.com/forums/index.php?forums/105/

        Mention the year in the post and that you assume it’s an NCV3. They’ll correct you if it’s wrong. (For instance, 2006 had some overlap between the T1N and the NVC3).

        • LemmyKnowsBest@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          11 months ago

          THANK YOU!! 🙏

          That’s an excellent write- up he did regardy Southern California converting to B20. I will follow his advice. If I have no choice but to use B20, I will keep a close eye on the oil level and do more oil changes and pay close attention to my fuel filter.

          and ah yes the sprinter forum. I tried joining that years ago but they never sent a confirmation email. I voted in my list of passwords years ago. I have a login and everything and they still recognize me. still trying to get in! Technology clearly hates me.

      • rifugee@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        11 months ago

        You can use a VIN decoder to get a bunch of info about your vehicle, including the engine type. Here’s one hosted by the US NHTSA, but I think it will work even if you’re outside of the US:

        https://www.nhtsa.gov/vin-decoder

        Basically, all the numbers and letters in your VIN aren’t random and actually mean something and you can cross reference them with various data tables to find out what they mean. A VIN decoder helps you do that.

        • LemmyKnowsBest@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 months ago

          Thank you! That gave me info that my vehicle is a SIX CYLINDER 🤪 Goofy face because I hate that I didn’t already know that. When I bought this vehicle, it came with no information whatsoever aside from a generic owner’s manual. Only someone who is a vehicle fanatic / mechanic would be able to know all the crucial details of this vehicle. So every time I have an issue I have to go to the internet and find people like you to tell me things about my own vehicle. Mercedes is ridiculous.