On Windows, features are often a few clicks away from being enabled or modified. Software that you download also does most of the heavy lifting when it comes to changing your settings to what the program needs.
On the Linux distros that I’ve used, way too much setup is required via copying and pasting commands into the terminal. There were times when I completely replaced my path variables instead of appending to them, and that is way harder to do on Windows than Linux. Mistakes like that often lead me to installing a distro 3 times when doing a project, whereas Windows 11 rarely has those issues.
You just grew up using Windows and are used to its design language – that doesn’t make it inherently intuitive.
If you are fucking with path variables you’re already a power user. The settings for an OOTB Ubuntu or other user-friendly distro are pretty damn intuitive, and if you’re dealing with anything more complex, I personally would far rather use bash or other Linux shells than Powershell.
You’re only partially correct. I did grow up using Windows, but I also dual-booted Ubuntu on every machine that I could. I also used a Macbook exclusively for a few years, and MacOS was way closer to Linux than Windows was back then.
Nowadays, I also use a mix of Powershell and Ubuntu via WSL, depending on what I need. Linux commands usually do less than what I’d like it to, but they work like simple building blocks. Powershell does exactly what I want, but some of these commands are way too freaking long.
However, I’d argue that path variables aren’t for power users. Sure, it’s not for your grandmother, but a decent chunk of people who wanted to run a Minecraft server for their friends probably looked into path variables, and almost all of them looked at firewall settings and port forwarding. Those people will be confused and scared of GUIs and editing txt or bat files. Without a friend walking them through the process, opening a terminal is infinitely more intimidating. Even if someone is fine with learning terminal commands, there aren’t nearly enough checks with Linux commands when doing something potentially destructive compared to Windows. With Windows, you usually get some minor annoyance with hard to find solutions at worst. With Linux, assuming no backups, you’ll end up needing to clean install if you’re trying to learn how to do something.
In all fairness, I haven’t used Linux GUIs often in about 4 years. The most recent time I used one at all was about a year ago when I was trying to set up a remote desktop solution, but didn’t know what a desktop manager was, what a display server was etc. I only really use Linux from a terminal nowadays.
EDIT: To add to the PATH thing, you severely overestimate the number of programmers who are also power users. It is crazy how many CS majors don’t know how to fix basic issues.
I would argue both have evolved in the opposite way though. Windows has become so unintuitive for me with every version after win 7. Splitting up control panel in many different locations. Multiple methods to remove different applications,… On windows server, it was even worse, and as soon as I moved away from Microsoft’s default built-in crap to third party tools, things actually became much easier.
While with Linux, things worked out of the box for me for a long time already and the process of things make sense a lot times, taking into account the requires minimal knowledge is there.
Being intuitive - was true of Windows 95 - XP, but was completely broken in the last couple of releases. Whatever version Windows is on now, it’s so much a guessing game what is and is not a button, or how to invoke a given tool within an application. They even took away the “menu > underlines” ffs.
Yeah I’m not talking about launching applications, I’m talking about how to divine that ctrl alt shift § invokes “find in page” or whatever without digging through the gorram tabs of the ribbon.
It’s so very power-user unfriendly, it would have made SO much more sense if Windows 3 or 95 had started or with those idiotic ribbons for crayon-eating users and THEN evolved into sleek, compact toolbar with hover tooltips hunting at keyboard shortcuts. But no, it was the other way around and I’m like unfathoming Asian head grab meme
So using find was obviously a simplistic example. I know ctrl F is near-universal for a regular find operation, but let’s imagine some other specialised feature of, say, a CAD application. “Find vertex in selected model” perhaps?
Oddly enough, I just discarded MacOS for a similar reason: yes, ctrl f is for “find” but, unlike on any other platform where ctrl shift f is “find in all files in project”, on MacOS that is cmd shift f. WTAF, there goes my muscle memory out the window. In fact, the “when is it ctrl and when is it cmd” threw me for such a loop that it impacted my performance. Now that I’m back on Linux, the tool disappears and I can just do my job. Ahh.
On the Linux distros that I’ve used, way too much setup is required via copying and pasting commands into the terminal. There were times when I completely replaced my path variables instead of appending to them, and that is way harder to do on Windows than Linux.
I knew I made a huge mistake last year installing Linux on my parent’s computers when I asked them to copy and paste commands into the terminal over the phone.
Fair. It’s still intuitive as an XP/7/8 user, but not for a new user. That being said, Windows 11 has made good improvements in moving stuff to the “Settings” app.
In what world does Windows have an intuitive, consistent UI/UX?
You just got used to the mess that Microsoft calls a “user experience”. Gnome and KDE are consistent platforms for their respective apps with Gnome having one of the most flushed out HIG (Human Interface Guidelines) of any desktop interface to make their DE in the most hands off/out of the way experience for you to focus on your tasks (subjective)
I would’ve agreed when I used i3 and no desktop environment, but now that I’m running gnome on fedora? I completely disagree. The user experience on gnome is far more coherent, intuitive, and less convoluted than on windows.
Being intuitive.
On Windows, features are often a few clicks away from being enabled or modified. Software that you download also does most of the heavy lifting when it comes to changing your settings to what the program needs.
On the Linux distros that I’ve used, way too much setup is required via copying and pasting commands into the terminal. There were times when I completely replaced my path variables instead of appending to them, and that is way harder to do on Windows than Linux. Mistakes like that often lead me to installing a distro 3 times when doing a project, whereas Windows 11 rarely has those issues.
You just grew up using Windows and are used to its design language – that doesn’t make it inherently intuitive.
If you are fucking with path variables you’re already a power user. The settings for an OOTB Ubuntu or other user-friendly distro are pretty damn intuitive, and if you’re dealing with anything more complex, I personally would far rather use bash or other Linux shells than Powershell.
You’re only partially correct. I did grow up using Windows, but I also dual-booted Ubuntu on every machine that I could. I also used a Macbook exclusively for a few years, and MacOS was way closer to Linux than Windows was back then.
Nowadays, I also use a mix of Powershell and Ubuntu via WSL, depending on what I need. Linux commands usually do less than what I’d like it to, but they work like simple building blocks. Powershell does exactly what I want, but some of these commands are way too freaking long.
However, I’d argue that path variables aren’t for power users. Sure, it’s not for your grandmother, but a decent chunk of people who wanted to run a Minecraft server for their friends probably looked into path variables, and almost all of them looked at firewall settings and port forwarding. Those people will be confused and scared of GUIs and editing txt or bat files. Without a friend walking them through the process, opening a terminal is infinitely more intimidating. Even if someone is fine with learning terminal commands, there aren’t nearly enough checks with Linux commands when doing something potentially destructive compared to Windows. With Windows, you usually get some minor annoyance with hard to find solutions at worst. With Linux, assuming no backups, you’ll end up needing to clean install if you’re trying to learn how to do something.
In all fairness, I haven’t used Linux GUIs often in about 4 years. The most recent time I used one at all was about a year ago when I was trying to set up a remote desktop solution, but didn’t know what a desktop manager was, what a display server was etc. I only really use Linux from a terminal nowadays.
EDIT: To add to the PATH thing, you severely overestimate the number of programmers who are also power users. It is crazy how many CS majors don’t know how to fix basic issues.
I would argue both have evolved in the opposite way though. Windows has become so unintuitive for me with every version after win 7. Splitting up control panel in many different locations. Multiple methods to remove different applications,… On windows server, it was even worse, and as soon as I moved away from Microsoft’s default built-in crap to third party tools, things actually became much easier.
While with Linux, things worked out of the box for me for a long time already and the process of things make sense a lot times, taking into account the requires minimal knowledge is there.
Windows 11 seems to be reversing that UI fragmentation. Way fewer features need the Control Panel now.
Being intuitive - was true of Windows 95 - XP, but was completely broken in the last couple of releases. Whatever version Windows is on now, it’s so much a guessing game what is and is not a button, or how to invoke a given tool within an application. They even took away the “menu > underlines” ffs.
There’s still a start menu and you can start everything by using the system search or even desktop shortcuts.
Regardless, you don’t have to worry about settings or requirements the way you do in Linux
Yeah I’m not talking about launching applications, I’m talking about how to divine that
ctrl alt shift §invokes “find in page” or whatever without digging through the gorram tabs of the ribbon.It’s so very power-user unfriendly, it would have made SO much more sense if Windows 3 or 95 had started or with those idiotic ribbons for crayon-eating users and THEN evolved into sleek, compact toolbar with hover tooltips hunting at keyboard shortcuts. But no, it was the other way around and I’m like unfathoming Asian head grab meme
Ctrl F?
So using find was obviously a simplistic example. I know
ctrl Fis near-universal for a regular find operation, but let’s imagine some other specialised feature of, say, a CAD application. “Find vertex in selected model” perhaps?Oddly enough, I just discarded MacOS for a similar reason: yes,
ctrl fis for “find” but, unlike on any other platform wherectrl shift fis “find in all files in project”, on MacOS that iscmd shift f. WTAF, there goes my muscle memory out the window. In fact, the “when is it ctrl and when is it cmd” threw me for such a loop that it impacted my performance. Now that I’m back on Linux, the tool disappears and I can just do my job. Ahh.I knew I made a huge mistake last year installing Linux on my parent’s computers when I asked them to copy and paste commands into the terminal over the phone.
I’m not trying to doubt you, I’m just genuinely curious - what are you walking your parents through that they need to use the terminal?
I can agree Linux is not intuitive.
I won’t agree Windows is intuitive. Its just not.
My argument? 2 settings panels for more than a decade now.
That’s it
Fair. It’s still intuitive as an XP/7/8 user, but not for a new user. That being said, Windows 11 has made good improvements in moving stuff to the “Settings” app.
In what world does Windows have an intuitive, consistent UI/UX?
You just got used to the mess that Microsoft calls a “user experience”. Gnome and KDE are consistent platforms for their respective apps with Gnome having one of the most flushed out HIG (Human Interface Guidelines) of any desktop interface to make their DE in the most hands off/out of the way experience for you to focus on your tasks (subjective)
I would’ve agreed when I used i3 and no desktop environment, but now that I’m running gnome on fedora? I completely disagree. The user experience on gnome is far more coherent, intuitive, and less convoluted than on windows.