• 𝘋𝘪𝘳𝘬@lemmy.ml
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    2
    ·
    1 year ago

    The SteamDeck battery already IS replaceable. Just open the case, unplug the battery, install a new one, and close the case.

    • Nibodhika@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      ·
      1 year ago

      Not exactly, the battery is glued so you need a heat gun and something to use as lever, both of which are a bad idea to do to a battery since you can overheat it or puncture it, not to mention bending it because you’re pulling on one side while the other is still glued. If your claim is that the deck battery is replaceable, then every other handheld also has a replaceable battery.

      • 𝘋𝘪𝘳𝘬@lemmy.ml
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        Wait a second … Glued? I just switched the SSD and saw some screws for the battery and assumed it’s just screwed in like with pretty much all modern laptops. Okay, in this case valve should remove the glue without replacement. This should comply with the new regulations I guess.

        If your claim is that the deck battery is replaceable, then every other handheld also has a replaceable battery.

        I cannot access the site right now to read about the regulations because the company firewall blocks it, but personally I differentiate between “field replaceable” and “replaceable”. A field replaceable battery can be replaced without any tools, just open the lid, take the battery out, and put a new one in, i.e. you can do it “in the field” = outside the workshop. Like for a TV remote. A replaceable battery to me is a battery that can easily be replaced with simple tools (and of course, without voiding the warranty) like I assumed for the SteamDeck.

        So yes, the SteamDeck would have a “replaceable battery” to me if they didn’t glue it in. My smartphone doesn’t have a replaceable battery to me.

        • Nibodhika@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          1 year ago

          From the link from OP:

          According to the document, a device’s portable battery can be considered “readily removable and replaceable” when it can be removed “with the use of commercially available tools” or specialised tools that are packaged with the product at no extra cost.

          So yeah, if the battery was not glued it would be in regulation, but it’s one of the things most teardowns complain, the battery is almost super glued in.

    • kadu@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      It is, but the adhesive used is aggressively strong and annoying to take out safely. And it’s so strong that you bend the battery in the process, harming it forever.

      Think about that compared to a GBA: open one screw, one door comes out, battery pack can be manually removed and reused how many times you want. You can even carry an extra pack and double your battery life.

      Replaceable battery packs are very different from a raw cell glued to the chassis.