• KISSmyOS@feddit.de
    link
    fedilink
    English
    arrow-up
    16
    arrow-down
    6
    ·
    10 months ago

    A knitting helper the size of a grapefruit that would have cost more than what a shepherd earned in a lifetime.

    • Ross_audio@lemmy.world
      link
      fedilink
      English
      arrow-up
      14
      arrow-down
      2
      ·
      10 months ago

      My argument against this is they’re all 12 sided. That’s like finding out knitting needles were all the same length and shape.

      Something used for a task like that will have variations in design.

      These things are oddly specific. The lack of evolution leads away from it being an actually designed and optimal tool.

      It’s definitely designed to look good first. If it does anything while looking good that’s a mystery so far.

      • tryptaminev 🇵🇸 🇺🇦 🇪🇺@feddit.de
        link
        fedilink
        English
        arrow-up
        6
        ·
        10 months ago

        Given that we are talking about roman times, metal was expensive, and working metal in such a way even more so.

        It could also be that similiar tools in cheaper were made out of wood and simply rottet away since then.

        • Ross_audio@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          ·
          10 months ago

          Those stone tools are surprisingly effective and efficient.

          The innovation block to improve was access to bronze.

          That’s different than a complex shape requiring rare resources and skills to produce appearing out of nowhere and disappearing again.

          If people start using that shape for knitting I’ll start to believe it. But all I’ve seen is that it can be used for knitting, not that it’s even close to the best shape for it.

          I’ll bet a knitter could learn to use one of those and improve on the design almost immediately, creating a better tool.

          • Apathy Tree@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            3
            ·
            10 months ago

            Sure, maybe the only thing preventing any innovation was access to a new material, tho I strongly doubt that for the same reasons many paleontologists doubt it - namely that they frequently weren’t even used, the stone flakes chipped off them were used instead, and that near the end of the period they can be found, there were actually some impactful changes to the design, before revolutionary new materials were found. But likewise in Roman times they were limited (both the skill to make it and decent enough quality material to actually work with)

            Only a few people in an area would be metal workers skilled enough to do something like this (and who knows, maybe the dumb thing is an apprentice training item, not actually serving any purpose), and they likely wouldn’t be the ones using it if it is for knitting. So perhaps until the design evolved into something so different we don’t recognize them as iterations, the same one was just used because the people doing the metal work weren’t the people using the tool, and didn’t want to have to design a workflow for something new for marginal increases in usefulness. Perhaps it appearing out of nowhere was also an innovation, lasted until the replacement of an entirely different design caught on or something, and abruptly died out because it wasn’t very good.

            Frankly I don’t have a dog in this one, and I don’t think it’s actually a knitting implement, I’m just saying a long time period without design change doesn’t necessarily mean anything.

            • Ross_audio@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              ·
              10 months ago

              My point is this isn’t a long period without design change though. Not compared to the axes.

              Innovation has periods of change and equilibriums.

              It’s an object around for a short period of time, then forgotten about.

              If it was a new innovation it would be when changes were constant, until the design settled into equilibrium.

              Essentially if it were a tool, there would also be prototypes and variations. Then the winning design. Not a winning design with no changes.

              • Apathy Tree@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                2
                ·
                10 months ago

                The prototypes (Or what commoners would use) may not have been metal, since metalwork was probably rather pricy, (carved wood or unfired clay perhaps) and decayed over time. Only the “winning” design was made metal, until replaced. :)

                Idk, really just spitballing, like I said I don’t think that’s actually what it’s for. I find it more likely to be an apprentice test object, kept as a status symbol. But we’ll probably never actually know.

                This little blurb from the article is why I think it’s a training object

                Parker says the piece was cast in “sticky,” leaden metal—making it difficult to mold—and was fragile in texture.

                “A huge amount of time, energy and skill was taken to create our dodecahedron, so it was not used for mundane purposes,” writes the group, adding: “They are not of a standard size, so will not be measuring devices. They don’t show signs of wear, so they are not a tool.”