Feature highlights:

  • Thru-axle and QR compatible
  • Built-in torque arm
  • 11-speed cassettes
  • Integrated cadence PAS sensor
  • Made in Canada

Sadly it didn’t get a torque PAS sensor.

If you’re in the market for an electric conversion kit and you like the idea of direct-drive hubs, it probably doesn’t get better than this.

  • Evkob@lemmy.caM
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    1 year ago

    Oooh, I’m not usually super enticed by e-bike stuff, but this has me wanting to start a conversion kit project…

      • Evkob@lemmy.caM
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I’ve never ridden an ebike. Care to explain the difference in practical terms? I imagine cadence and torque are roughly correlated, but with cadence sensors you’d have to pay more attention to your hearing?

        I’ve really no idea, like I said I have zero experience with ebikes.

        • w00zy
          link
          fedilink
          arrow-up
          5
          ·
          1 year ago

          Cadence sensors detect how fast the cranks are spinning and apply power based on that, although I’m not super clear on where it detects the motion when integrated into a hub like this example. Torque sensors detect how much power you’re outputting and apply power based on that.

          With cadence sensors you can shift into an easy gear and spin the pedals and have the motor do all of the work, torque sensors add a percentage of your power and make it feel like you’re riding a normal bike but are x% stronger. In general people that are already serious cyclists strongly prefer torque sensors but a well tuned cadence sensor can be fine on a utility type bike where you’re not as picky about how the power gets applied.

          Torque sensors cost more.

          • mrpants@midwest.social
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Not sure on these ones specifically but the experience of a cadence sensor for me is rapid and unintuitive acceleration. In this way I think torque sensors, despite higher cost, are much more fit for regular non-serious cyclists like me.

            Of course the comment OP should head over to a couple ebike stores and do some test rides to evaluate this and other factors for themselves if they’re able.

            • w00zy
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              I have very little experience on cadence sensors but have heard people discuss tuning them to be better. I don’t want to poopoo something I haven’t used and can believe that with proper software it can be acceptable for some uses.

          • Evkob@lemmy.caM
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Thanks for the thorough answer! I’ll have to keep that info in mind for when my knees finally give out (or if I start a much longer commute)

            • neighbourbehaviour@lemmy.worldOP
              link
              fedilink
              arrow-up
              3
              ·
              1 year ago

              Try a reputable bicycle brand mid-drive ebike at an expo or a store if you get a chance. You may not necessarily want that but it’ll give close to the best experience an ebike can give.