• jadero@programming.dev
    link
    fedilink
    arrow-up
    19
    arrow-down
    1
    ·
    9 months ago

    There was a thread elsewhere asking whether a toggle should show current state or the state desired. There was enough disagreement that it quickly became apparent that, whatever else the toggle does, there should be something external to the toggle showing the possible states, indicating which way to move the toggle regardless of toggle appearance.

    • The disagreement was actually all over whether the question was about a switch or a button, and so some people were answering as though it was a switch, and some people were answering as though it was a button - switches and buttons do indeed have opposite approaches usually (a switch usually shows the current state - such as “on” - but a button shows what action will be triggered by pressing it, such as “play”).

    • snowe@programming.devM
      link
      fedilink
      arrow-up
      4
      ·
      9 months ago

      that post is about toggle buttons, not switches. e.g. a play pause button, when pressed, does it show play, or does it show pause?

        • snowe@programming.devM
          link
          fedilink
          arrow-up
          2
          ·
          9 months ago

          still, people are clearly confused by the button. I’m just gonna make it an animation and prefers-color-scheme since that’s so widely supported now.

    • im sorry i broke the code
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      The designer team once did a toggle button with the inverse logic and I was so confused when I had to implement that. It must be my antithesis.

    • Feathercrown@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      9 months ago

      It really depends on the type of control and what it’s controlling. As this is a switch, you’d expect the current state to be what’s shown on the same side as the slider-- in this case, the slider is a sun in dark mode and a moon in light mode, which is the opposite way.