I’m testing a geneva drive (you can see it in the front in the photo), that should allow me to reduce the number of motors even further. I think I can get it down to two, maybe even one.
Oh that gearbox on the left?? I was just thinking that you could setup some gears similar to a analog clock to use only one motor. Does the geneva drive support snapping into position? With analog you’d want smooth motion, but here you’d want stepped positions. The snap is what makes this build so satisfying to me.
There is no snapping, but the geneva drive will stay locked in position when it is not moving. The thing that I haven’t figured out is how to get the 3 to go back to 0 after 23:59, it needs to skip the numbers 4 to 9.
Just yesterday youtube showed me this video and I thought to myself what a waste it is to use 30 servos for a project like this:
https://youtu.be/YQLStT4RXVo?si=wXzEu28u1hp5dKQr
Your solution is so much cooler.
This video was the inspiration for my project!
Yep. I thought of this video as well!
This is a much better engineering solution. Only requires 4 motors.
I’m testing a geneva drive (you can see it in the front in the photo), that should allow me to reduce the number of motors even further. I think I can get it down to two, maybe even one.
Oh that gearbox on the left?? I was just thinking that you could setup some gears similar to a analog clock to use only one motor. Does the geneva drive support snapping into position? With analog you’d want smooth motion, but here you’d want stepped positions. The snap is what makes this build so satisfying to me.
There is no snapping, but the geneva drive will stay locked in position when it is not moving. The thing that I haven’t figured out is how to get the 3 to go back to 0 after 23:59, it needs to skip the numbers 4 to 9.
Ok thats making my brain hurt. I’m clearly not a mechanical engineer!
https://en.wikipedia.org/wiki/Geneva_drive
Just make it turn back by 3 clicks. If you’re watching the clock closely enough to notice at midnight you should go to bed anyway 🤷♂️
Seriously though, awesome project!
Wow, never occurred to me before, but this is such an elegant, and simple solution.
Here is an alternative Piped link(s):
https://piped.video/YQLStT4RXVo?si=wXzEu28u1hp5dKQr
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.