Nintendo Co. is advising game publishers that its next-generation console will be delayed until the early months of 2025, according to people with knowledge of the matter.
Reports were saying the Switch was coming q4 2024, but now Nintendo is reportedly telling its partners that it’s been pushed to q1 2025
I’d recommend that you get these ones, but you can pick them up plenty of places that aren’t Amazon too, just make certain you get the ones made by Gulikit, any others are probably as cheap as your originals and you’ll have to come back and replace them again in short order. The Gulikit ones use Hall Effect sensing rather than resistive contact pads that will eventually scrape down and break.
That kit at Amazon comes with all the tools to do the job and as the sticks are Hall Effect based, they’ll theoretically never drift unlike the ones that ship with Joy-Cons straight from Nintendo.
Joystick drift can be fixed at home with like 15 dollars worth of replacement parts lol
It works so well I’ve done it several times! On the same joycons.
Speaking seriously, DO NOT OVER-TIGHTEN. Those ribbon cables are super brittle.
Link me
I’d recommend that you get these ones, but you can pick them up plenty of places that aren’t Amazon too, just make certain you get the ones made by Gulikit, any others are probably as cheap as your originals and you’ll have to come back and replace them again in short order. The Gulikit ones use Hall Effect sensing rather than resistive contact pads that will eventually scrape down and break.
That kit at Amazon comes with all the tools to do the job and as the sticks are Hall Effect based, they’ll theoretically never drift unlike the ones that ship with Joy-Cons straight from Nintendo.
iFixIt has the process for doing the work: https://www.ifixit.com/Guide/Left+Joy-Con+Joystick+Replacement/113182 and https://www.ifixit.com/Guide/Right+Joy-Con+Joystick+Replacement/113185
Ordered. Thanks for the info
I have gotten two sets of drifting Joycons replaced for free. If you are in the US make sure to check out their support page.
I tried that but the form wanted copies of receipts which I have long since lost (not in the us)