So I like to use Xbox controllers (doesn’t matter if it’s first- or third-party) because I like the layout, it’s just comfortable to me. However I’ve noticed that on all my controllers in the past few years, the left thumb stick will start to “give out” over the course of a couple months. For instance I’ll be pushing it forward all the way, but it won’t register for some reason and my character will only move a little bit. Sometimes wiggling it a bit will fix it, sometimes it doesn’t. And it’s not like I’m squeezing the hell out of the controller or mashing the stick constantly; in fact it’s made me try to be more delicate with my controllers, even though I’m just playing the games normally.

Is it just how controllers are, or am I just getting the shit end of the stick?

  • Dariusmiles2123
    link
    fedilink
    English
    arrow-up
    2
    ·
    10 months ago

    Do you do this without even opening the controller?

    I might try this before opening my Ps5 controller if it doesn’t work.

    • Fubarberry@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Yes, with the controller off, I spray down around the stick. Wait awhile before turning the controller back on so that the spray has time to evaporate.

      Someone told me it fixed Joycon drift (which it does), but since then it’s fixed a lot of non-joycon controllers as well despite the different thumbstick designs.

      • Dariusmiles2123
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        Okay well thanks for the answer.

        I’m gonna try to find an equivalent product then.