Windows 11 now supports USB4 at 80Gbps, also known as USB 4 2.0 | Faster USB4 devices could start appearing in 2024::undefined

  • Otter@lemmy.ca
    link
    fedilink
    English
    arrow-up
    14
    ·
    8 months ago

    I never bothered to check, but are there multiple organizations making different names? Or just one that has no consistency whatsoever

    • bloopernova@programming.dev
      link
      fedilink
      English
      arrow-up
      32
      ·
      8 months ago

      They name by committee. So every corporation that is in the USB standards group will argue for whatever benefits them, with no consideration for consumers.

      I fucking hate it. Buy a USB C cable and it’s a crapshoot whether it’s USB 2 with no power delivery, or poor quality with power delivery. Just trying to find a good quality USB 3 cable is difficult, with 3.1 or 3.2, x2 or not, shitty control chips, etc etc.

      • Jonathan@lemmy.world
        link
        fedilink
        English
        arrow-up
        21
        ·
        8 months ago

        It is absolutely infuriating. It blows my mind that you can have a USB 3.2 Gen2 cable that does everything you need it to, except for the fact that it doesn’t support Power Delivery and a lot of the time you won’t even know, so if you’re sending high wattage through it there’s a real possibility you’re gonna burn some to kind up.

        • Socsa
          link
          fedilink
          English
          arrow-up
          1
          ·
          8 months ago

          In theory, compliant devices can detect the voltage drop over shitty cables and request a lower charging rate.

        • BorgDrone@lemmy.one
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          8 months ago

          if you’re sending high wattage through it there’s a real possibility you’re gonna burn some to kind up.

          Anything over 3A or 60W requires the cable to have an e-marker. A little chip inside one of the connectors that indicates what the cable is capable of. No USB certified device should try to pull 60W or more through a cable without e-marker or anything above what the cable can handle if it does have a marker.