p1mrx to 3DPrinting@lemmy.worldEnglish · 9 months agoIs Gyroid infill using a suboptimal algorithm?github.comexternal-linkmessage-square7fedilinkarrow-up128arrow-down13
arrow-up125arrow-down1external-linkIs Gyroid infill using a suboptimal algorithm?github.comp1mrx to 3DPrinting@lemmy.worldEnglish · 9 months agomessage-square7fedilink
minus-squareRolivers@discuss.tchncs.delinkfedilinkEnglisharrow-up4·9 months agoI don’t think so. It gives the opportunity to fill the printed object with resin.
minus-squarep1mrxOPlinkfedilinkEnglisharrow-up3·edit-29 months agoYou could still fill a watertight gyroid lattice with resin, if both volumes are accessible. Though the defects are probably useful for releasing air bubbles.
I don’t think so. It gives the opportunity to fill the printed object with resin.
You could still fill a watertight gyroid lattice with resin, if both volumes are accessible.
Though the defects are probably useful for releasing air bubbles.