Running an ender 5 and while my board technically works fine, the USB socket popped off and despite my best efforts the joint holders are too damaged to solder a new one.

I mean maybe it’s about time, I had lost the original config file anyways. Does anyone have an idea of what’s “good” these days? Not really looking to spend more than $200 if I can help it

  • yokonzo@lemmy.worldOPEnglish
    3·
    10 months ago

    The steppers run quieter? I didn’t realize this was possible from just a board change

    • SzethFriendOfNimi@lemmy.worldEnglish
      2·
      10 months ago

      They come with 2209’s which tend to be quieter

      I have the skr mini e3 v3 which has worked very well.

      Easy to setup in Klipper too if that’s your thing

    • wildbus8979English
      1·
      10 months ago

      Not sure which drivers came stock on your Ender 5 board, it’s possible it already uses “quiet” drivers.

    • morbidcactus@lemmy.caEnglish
      1·
      10 months ago

      Oh yeah what others said, the 2209 drivers are substantially quieter than those on the rambo. Most of the noise is from fans now.