The DMC floss is from my local craft store, and the CXC is from an Etsy seller. It’s stitched on 22ct aida.

If I’ve learned nothing else from this experience it’s that aida cloth made by Loops & Threads may possibly be the worst made anywhere… Seriously don’t buy it

But I digress. Each test has a 2 over 1 10x10 square, a 2 over 1 tent stitch, and a 1 over 1 backstitch

DMC (listed as “D”) and CXC (listed as “C”) both use the same numbering system

All pictures were taken after this was washed and ironed

Here are the closeups of each color and I will give my final thoughts and total costs at the end!

DMC 726

DMC 740

DMC 420

DMC 3716

DMC 920

DMC 817

DMC 3861

DMC 550

DMC 932

DMC 3843

DMC 911

DMC 3818

Next the prices:

DMC from the local craft store is $0.69USD/skein

The CXC had to be purchased in bulk, with the smallest amount being 50 skeins at $16.61USD which makes them about $0.33/skein HOWEVER, no one sells this locally and unbeknownst to me the shipper I bought from was based in the UK but even with shipping the cost still came to a slightly less impressive $0.64USD/skein

So, definitely a big savings IF you can find it nearby!

As you can see some colors came out almost identical, while others are off slightly, and one or two being really noticably different

The CXC floss is definitely thicker and fuzzier and a little bit harder to work with, but not terribly so!

I would say you could use one or the other without any major difference in the finished piece UNLESS you’re using them directly side by side as I did in the test pattern

My personal final opinion is that I would still probably pay more for the DMC floss just because it’s easier to work with unless I needed to buy in bulk for a huge project that needs like 75 to 100 different colors in which case the CXC would be the way to go, but I wouldn’t necessarily mix the two in the same project!

Well, that’s it! Let me know if there are any other questions I can answer! I hope you guys enjoyed reading this as much as I enjoyed making it!

  • thegiddystitcher@lemm.eeM
    link
    fedilink
    arrow-up
    6
    ·
    9 months ago

    Wow those colours are a lot closer than my one foray into the off-brand stuff. Like, a LOT closer! And UK you say? Might need you to hook me up lol.

    You really went above and beyond for this scientific report and I for one appreciate it very much. Now just to take identical photos for the next 20 years then report back on how the stitches and colouring have held up over time 😉

    What’s so unusual about the aida?

    • MrJameGumb@lemmy.worldOP
      link
      fedilink
      arrow-up
      5
      ·
      9 months ago

      Interestingly they didn’t look as similar before I washed and ironed the finished pattern! When I washed it they looked even more different while the fabric was wet, but once I ironed it and let it dry they looked much more similar!

      Here is the Etsy seller I used! Even going from the UK to the US the shipping wasn’t bad and it got here really fast!

      The aida is the house brand of Michael’s, which is one of the craft stores I go to. It felt very flimsy, and it stretched out of shape WAY too easily. The worst part though was that stitches kept getting pulled straight through the cloth! This is why the backstitch patterns on the right started to look more and more sloppy 😞