Hi there.
I’m using this unit here: https://www.amazon.com/dp/B09YNBHR73
The issue I am having is subwoofers and not having a lot of money to fix my situation.
I currently have that 3 x 8" ported Skar box, but it has such low impedance that the speaker safety trips constantly on it. Godzilla help me if someone says a word with a p in it.
Is there a way for me to rewire that setup to gain more impedance and stop it from cutting off or should I move on and get a single 12" for the small box I have? (I have a behind the seat single 12" enclosure.)
I’d obviously love to have bass as deep as possible, but any options would be nice.
Thanks
So let me try and rationalize this because this Skar box setup is weird.
This must be how it is wired currently because it does show 1.3Ohm on my multimeter.
And I’d want to do what is shown in the 3x speaker example on this?
It is a non-ported, angled, behind the seat “truck box”. This is the speaker that I found in it: https://www.pioneerelectronics.com/PUSA/Car/Subwoofers/Shallow+Mount/TS-SW124D
It was 100% blown, sadly. :(
deleted by creator
This is the chart for the amp here:
I have the 32v 5amp power box for it so that’s the line that matters.
deleted by creator
Oh, sorry.
Box dimensions: 13" bottom depth
8 1/2" top depth
14 1/2" width
13" height
Measured from the outside.
Material is 5/8" thick MDF
deleted by creator
Any reason that this guy here wouldn’t work?
deleted by creator
The info on page 5 what you need?
Page 6 has recommended enclosures for it as well.
deleted by creator
Around $100ish would be ideal. Has Cerwin-Vega been enshittified yet?