• PriorityMotif@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    8 months ago

    No, they don’t usually want to mess with odometers because of the liability. I think most manufacturers require that the cluster is sent to them in order to verify the correct mileage and then program a new one. There’s aftermarket tools for doing it on some models, others you can just dump an eprom with a cheap programmer, it just depends really.

    • sugar_in_your_tea
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      8 months ago

      That’s ridiculous. Here’s a decent way to do it:

      1. Desolder the chip (or have a read-only port to plug into) and put it on a test board
      2. Read the chip output and send it to the manufacturer (has mileage plus w/ cryptographic signature)
      3. Manufacturer sends newly programmed chip to the mechanic, and the mechanic sends the old chip back in the provided packaging
      4. Customer gets the car back, and the manufacturer can verify that the chip swap was legit

      Boom, under a week turnaround without any backdoors in the odometer.