stabby_cicada@slrpnk.net to Solarpunk@slrpnk.net · 7 months agoconsider the implications for a post scarcity futureslrpnk.netimagemessage-square392fedilinkarrow-up11.7Karrow-down172cross-posted to: [email protected]
arrow-up11.63Karrow-down1imageconsider the implications for a post scarcity futureslrpnk.netstabby_cicada@slrpnk.net to Solarpunk@slrpnk.net · 7 months agomessage-square392fedilinkcross-posted to: [email protected]
minus-squareuis@lemm.eelinkfedilinkarrow-up2arrow-down7·7 months agoThat’s why I say low frequency is problem, but high is not as much.
minus-squareareyouevenreal@lemm.eelinkfedilinkarrow-up4·7 months agoIt’s not just about frequency - though that is important for devices that synchronize using the grid. When your frequency is going up because of too much power so will voltage. Think about that for a minute.
minus-squareuis@lemm.eelinkfedilinkarrow-up2·7 months agoNot necessarily(see field windings), but higher voltage is indeed a problem
minus-squareareyouevenreal@lemm.eelinkfedilinkarrow-up2·7 months agoNot everything on the grid is a motor. Even if it was you would still need to rebuild the motor to change field windings.
minus-squareKillingTimeItself@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up3·7 months agosome clocks are bound to grid frequency. It’s the easiest most accessible way to clock time semi accurately.
That’s why I say low frequency is problem, but high is not as much.
It’s not just about frequency - though that is important for devices that synchronize using the grid. When your frequency is going up because of too much power so will voltage. Think about that for a minute.
Not necessarily(see field windings), but higher voltage is indeed a problem
Not everything on the grid is a motor. Even if it was you would still need to rebuild the motor to change field windings.
I don’t think you said why?
some clocks are bound to grid frequency. It’s the easiest most accessible way to clock time semi accurately.