[Help]Update : gave up on fo48u kvm because it is crap. Aorus FO48U KVM switch disconnects mouse and keyboard when playing games.

Croquette · edit-2 7 months ago

[Help]Update : gave up on fo48u kvm because it is crap. Aorus FO48U KVM switch disconnects mouse and keyboard when playing games.

just_another_person@lemmy.world · 7 months ago

Sounds like your monitor is hitting a power drain and resetting the USB while under load. Try turning your refresh rate down, and disabling any extended USB power settings (like always on port, or rapid charging voltage) for the monitor and see if it stops.

Croquette · 7 months ago

That’s something I will try. My only gripe with that explanation is that I didn’t have the issue when my windows machine (which is exactly the same as it is now, except with Kubuntu) was using the same mouse, keyboard and setup.

I could try to put a mouse directly on my PC and keep my keyboard as is to see if I can trigger the issue. I might be on the brink of overcurrent and when the GPU is running hotter, it might trip the power drain.

My intuition is that since the nvidia driver on linux isn’t great, there might be an issue between the GPU and the HDMI connection to the monitor. And since the functionality of the KVM depends on the HDMI connection to the PC, if there is an issue, that might cause the issue. In the Xorg log, we can see that there is a hiccup with the GPU and it seems to be restarting the hdmi.

Still, I will try to lower the power consumption by reducing the GPU load, and any settings I can change on my monitor and see if that causes issues.

That’s a lot of great advices. Thanks

just_another_person@lemmy.world · 7 months ago

Yeah, I get what you mean. You may also want to disable any USB power saving features on the host machine that is causing the disconnect. If Windows was working previously, maybe there’s an issue with the power saving settings for your Linux install. It’s clear from the logs there is a disconnect at USB, and then everything tries to reset though.

catloaf@lemm.ee · 7 months ago

It’s really hard to say for sure, because there’s almost never accessible logs from the monitor or USB controller. First course of action is usually firmware updates. Monitor firmware, PC BIOS/UEFI. Then try swapping hardware. Make sure your USB-C cable is appropriately rated to carry video of the resolution you’re using, plus the USB traffic. I assume it’s not also carrying power. Then try different USB-C ports on the PC (front/back/addon cards).

If possible, you might try changing from USB-C to USB-B connections to see if that’s any more reliable. Or at least use separate cables for video and USB. A quick check of the manual suggests that’s supported.

Croquette · 7 months ago

Right now, my configuration is 2 hdmi cables for video output (one in my pc and the other in my work pc), a usb connection from each of these computer to the monitor (usb c for the work pc and usb b for the pc) and my mouse an keyboard are plugged each into their own usb port on the integrated kvm.

My monitor is updated to the latest firmware, and bios is updated to the last firmware it can be (it’s an old motherboard, so not really supported anymore).

I doubt that the bios is the issue here because I had the same bios back on windows 10, and I didn’t have the issue back then.

But that a good avenue to explore still. Thanks for your input.

f4f4f4f4f4f4f4f4@sopuli.xyz · 7 months ago

Try some non-Razer input devices. I’ve seen multiple systems act strangely because of them, although the usual problem is that the system won’t POST with the offending device plugged in… Unplug, boot system, plug in, and it works fine (until it’s time to reboot or power-cycle).

Croquette · 7 months ago

Thanks for the input, but I am just not using the kvm anymore. It’s flaky even in normal use. I will get a wireless mouse with connection profile and have 2 cables for my keyboard.