Yeah I know these are used for counting vehicles but can they also be used for detecting vehicle speed?
Description: two pneumatic hoses, affixed to a road. They lead to a box that’s locked to a telephone pole. Location is southern California. On a minor artery road.
Doubtful that it’s to survey if a new stop sign is needed since the next street is minor, dead ends into this one and already has a stop sign. The next intersection with another minor artery already has a stop sign.
Extremely doubtful that a traffic light is being considered since there isn’t anywhere near the amount of traffic to justify one.
This is located on a slope. Many cars speed down here. That’s why I’m wondering about speed sensing by this device.
It’s for traffic count. IIRC the double track to is differentiate the count between passenger cars and semi-trucks (aka tractor trailers, 18 wheelers). The double track can differentiate when there are multiple axles like you see on semi-trucks. Sometimes you want separate counts.
You could calculate speed for shits and giggles but it’s not enforceable obviously.
It’s not for enforcement…this will tell them if they can ‘make profit’ by putting up auto ticketing systems that fine you when speeding.
Yes it’s not for enforcement, that’s why I said it’s not enforceable. And that it’s for traffic counts.
They generally only use a single one for counts. You use the double setup here for speed tracking.
What I’m saying is they use a double to differentiate counts between passenger cars and semi-trucks (aka tractor trailers, 18 wheelers). Sometimes you want a count of 1) passenger cars and 2) semi-trucks. That’s what I remember learning it was for. I’ll edit my previous reply in case people are misreading it.
You can do that with a single line. It’s a closed, flexible tube with a pressure sensor. Effectively a crude scale. It measures the weight on the axle. Semi trucks weigh a LOT more than passenger vehicles, even ridiculous pickups.