Hi All, I recently got myself some proper headphones and DAC but now I realise I don’t have much high quality music , my collection is mostly flac but only very few higher than 48k. So where do you get your music? does it even matter beyond that?

  • Scrubbles@poptalk.scrubbles.tech
    link
    fedilink
    arrow-up
    8
    ·
    1 year ago

    Oh I gotchu fam

    • 7digital - https://us.7digital.com - It’s fine, UI is a bit wonky, selection is meh, customer support has always been great - Quality wavers between mp3 and flac, 24 is available in most places

    • HDTracks - https://www.hdtracks.com/ - Much better selection and UI, downloading is a bit weird. Nice middle mix - Most is 24 bit flac but some drops off

    • ProStudioMasters - https://www.prostudiomasters.com - Great Selection, requires their download manager but otherwise it’s fine. Very pricey though, but probably best quality you’ll find. Most is 24bit flac.

  • Beto@lemmy.studio
    link
    fedilink
    arrow-up
    8
    ·
    1 year ago

    It shouldn’t matter. If the FLAC is at 48k it means it will be able to reproduce sounds up to 24kHz, which is beyond human hearing.

    My understanding is that higher rates (like 96k) are only useful during music production, in order to prevent aliasing. But for listening 48k is all you need.

  • DigitalAudio@forum.dxcomplex.com
    link
    fedilink
    arrow-up
    8
    ·
    edit-2
    1 year ago

    I guess I’ll have to ask the question… what exactly are you looking for? And why would you look for anything higher than 48k?

    I’ll talk a bit about sample rate and DAC converters since you asked about it, and in case anyone is interested.

    Short answer is: there is no proof whatsoever in any controlled measurement tests conducted to say that sample rates beyond 48kHz (arguably 44.1kHz) make any difference at all to what you hear. And if you look at the ADC/DAC process, you can pretty easily see why it really is like that. Basically, mathematically speaking, you will get the exactly same analog signal after the conversion, as long as your sample rate is at least twice as fast as your highest frequency. Naturally, in order to make sure this works, you need an anti-alias filter, which is why the standard has been set at 44.1kHz for so long. So modern devices reliably have had filters with a good enough slope to make 44.1kHz viable for decades now, never mind anything beyond that. Here’s a short explanation about the process

    Why do some people talk so much about higher sample rates, then?

    Higher sample rates do matter considerably in the following cases: you want to process your audio heavily, especially if you want to slow it down, extend its length and other time or frequency processes? You definitely want a higher sample rate. You want to synchronize your audio with video? In that case multiples of 48kHz would be recommended, so it can match with either 30fps or 24fps which are the two major standards. 44.1kHz may lead to synchronization problems, though modern day video editors have mostly fixed this issue, and DAWs like Reaper make sample rate look like a concern from the past with their excellent conversion system.

    • leds@feddit.dkOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Thanks a lot DigitalAudio and others, the conclusion and answer to my second question is that 44.1/48kHz is good enough, I’ll keep collecting those then. Although I’m sure there will be audiophiles out there that strongly disagree

  • Rentlar@beehaw.org
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    The Nyquist theorem states that the highest frequency that can be replicated in a digital signal is half the signal’s sample rate.

    Now if you have a 48kHz the highest frequency that can be replicated is 24kHz. Human hearing is known to go up to around 20kHz sometimes a little more, but over your lifetime the top end gets worse. So unless you’re trying to play music higher fidelity music for your pet (cat, dog, rodent, or horse) you don’t need higher sample rate music.

  • leds@feddit.dkOP
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    Thanks for the good comments and suggestions everyone, i mostly use bandcamp but had forgotten 7digital existed

    • leds@feddit.dkOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      well i tried… seems that 7digital will not let you buy from them anymore if they don’t have a shop for your country “If you are currently located in a country that doesn’t have a local store you will unfortunately be unable to purchases from 7digital.” why does this have to be so hard…

  • joshLaserbeam@beehaw.org
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    You don’t really need more than CD quality 44.1kHz/ 16 bit uncompressed audio. At that point the mix is more important. I try to go for early pressing of CDs and vinyl because I find most remasters are overly compressed and de noised, which sucks the life out the music.

    But for new albums, I been liking SDEs reissue series on Blu Ray Audio, almost all of them have the best new stereo mixes I’ve heard of the albums they released and have Atmos mixes, if your interested in spacial audio. Apple Music has many of those albums, but they are compressed, even the Atmos versions.

  • EthicsGradient@lemmy.one
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Most of my collection is CDs ripped to FLAC. It can be slow going, but I enjoy hunting around charity shops/thrift stores for new albums. You can also check out the Discogs marketplace. I’ve bought some things digitally from active bands on Bandcamp, and some I knew I’d never find from sites like 7digital and HDTracks.