Been finding some good deals on 2.5 disks lately, but have never bought one before. Have a couple of 3.5 disks on the other hand in my Unraid server. Wondering how much it matters wether I get a 2.5 or not? What form factor do you prefer/usually go for?
Probably best to go with something in the 3.5" line, unless you’re going enterprise 2.5" (which are entirely different birds than consumer drives)
Whatever you get for your NAS, make sure it’s CMR and not SMR. SMR drives do not perform well in NAS arrays.
Many years ago I for some low cost 2.5" Barracuda for my servers only to find out years after I bought them that they were SMR and that may have been a contributing factor to them not being as fast as I expected.
TLDR: Read the datasheet
I just want to follow this up and stress how important it is. This isn’t “oh, it kinda sucks but you can tolerate it” territory. It’s actually unusable after a certain point. I inherited a Synology NAS at my current job which is used for backup storage, and my job was to figure out why it wasn’t working anymore. After investigation, I found out the guy before me populated it with cheapo SMR drives, and after a certain point they just become literally unusable due to the ripple effect of rewrites inherent to shingled drives. I tried to format the array of five 6TB drives and start fresh, and it told me it would take 30 days to run whatever “optimization” process it performs after a format. After leaving it running for several days, I realized it wasn’t joking. During this period, I was getting around 1MB/s throughput to the system.
Do not buy SMR drives for any parity RAID usage, ever. It is fundamentally incompatible with how parity RAID (RAID5/6, ZFS RAID-Z, etc) writes across multiple disks. SMR should only be used for write-once situations, and ideally only for cold storage.