Hey all! I’m having an issue that’s probably simple but I can’t seem to work it out.

For some history (just in case it matters): I have a simple server running docker and all services being defined in docker-compose files. Probably doesn’t matter, but I’ve switched between a few management UIs (Portainer, Dokemon, currently Dockge). Initially, I set everything up in Portainer (including the main network) and migrated everything over to Dockge. I was using Traefik labels but was getting a bit annoying since I tend to tinker on a tablet. I wanted something a bit more UI-focused so I switched to NPM.

Now I’m going through all of my compose files and cleaning up a bunch of things like Traefik labels, homepage labels, etc… but I’m also trying to clean up my Docker network situation.

My containers are all on the same network, and I want to slice things up a little better, e.g. I have the Cloudflared container and want to be selective about what containers it has access to network-wise.

So, the meat of my issue is that my original network (call it old_main) seems to be the only one that can access the internet outbound. I added a new network called cloudflared and put just my Cloudflared container and another service on it and I get the 1033 ARGO Tunnel error when accessing the service and Cloudflare says the tunnel is down. Same thing for other containers I try to move from old_main, SearXNG can’t connect, Audiobookshelf can’t search for author info, etc… I can connect to these services but they can’t reach anything on the web.

I have my docker daemon.json set to use my Pi-hole for DNS and I only see my services like audiobookshelf.old_main coming through. I also see the IP address of the old_main gateway coming into Pi-hole as docker-host. My goal is to add all of my services to new, more-specific networks then remove old_main but I don’t want to drop the only network that seems to be able to communicate with the web until I have another that can.

I’m not sure what else to look for, any suggestions? Let me know if you need more info.

  • qx128@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    1
    ·
    4 months ago

    It sounds like your issue might be related to how your Docker networks are configured for DNS and internet access. Try these:

    1. Check Network Configuration: Ensure your new networks are correctly configured to allow internet access. Docker networks should be able to route traffic to the internet by default unless specified otherwise.

    2. DNS Configuration: Since you’re using Pi-hole for DNS, make sure the new networks are properly configured to use Pi-hole as their DNS server.

    3. Inspect Network Settings: Compare the settings of old_main with the new networks. Use the following command to inspect the network configuration:

      docker network inspect old_main
      docker network inspect cloudflared
      

      Pay attention to the gateway, subnet, and any custom DNS settings.

    4. Check Docker Daemon Configuration: Verify that your daemon.json file is correctly set up to use Pi-hole for DNS. It should look something like this:

      {
        "dns": ["<Pi-hole IP>"]
      }
      
    5. Verify Container Configuration: Ensure that your containers are correctly configured to use the new network. This can be specified in your docker-compose files like this:

      version: '3.7'
      services:
        cloudflared:
          image: cloudflare/cloudflared
          networks:
            - cloudflared
      
      networks:
        cloudflared:
          external: true
      
    6. Check Firewall Rules: Ensure there are no firewall rules on your host or network equipment that might be blocking traffic from the new networks.

    7. Test Connectivity: Run a simple connectivity test from within a container on the new network to check internet access:

      docker run --rm -it --network cloudflared alpine ping -c 4 google.com
      

      If this fails, the issue is likely with network configuration rather than the containers themselves.

    8. Docker Network Restart: Sometimes, Docker networks need to be restarted to apply changes correctly. Try removing and recreating the problematic networks:

      docker network rm cloudflared
      docker network create cloudflared
      

    If none of the above steps resolve the issue, there might be a deeper configuration problem. At this point, it might be helpful to see the exact configuration of your docker-compose files and the output of the network inspection commands.

  • Perhyte@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    4 months ago

    Any chance you’ve defined the new networks as “internal”? (using docker network create --internal on the CLI or internal: true in your docker-compose.yaml).

    Because the symptoms you’re describing (no connectivity to stuff outside the new network, including the wider Internet) sound exactly like you did, but didn’t realize what that option does…

  • lemmyvore@feddit.nl
    link
    fedilink
    English
    arrow-up
    1
    ·
    4 months ago

    What does “old network” and “new network” mean? What are they, LAN setup? Docker setup? Describe them better (netmasks, routing etc.)

    • shiftymccool@programming.devOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      4 months ago

      I’m referring to docker bridge networks. old_main is in the 10.2.1.0/24 subnet and i’m trying to move everything to a new bridge network on a subnet of 10.0.0.0/24. sorry, i’m not exactly sure what other info would be useful