ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 | ESP32-S3-Zero
www.waveshare.com
ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 | ESP32-S3-Zero
  • LazaroFilm@lemmy.worldEnglish
    4·
    3 months ago

    Wave share boards are solid. I use one with a rp2040 and circular touchscreen in one of my products and it’s great.

  • MrScottyTayEnglish
    1·
    3 months ago

    Would you be able to make a keyboard with this to use 2.4ghz? Is there any firmware that would allow that at the moment that this could run?

    • apt_install_coffee@lemmy.mlEnglish
      1·
      3 months ago

      I don’t think there’s any firmware support for keyboard over IP (I assume this is what you want rather than a different protocol over a wifi network), though zmk does Bluetooth support I believe.

      • MrScottyTayEnglish
        1·
        3 months ago

        Oh is it not the 2.4ghz that is used for other non Bluetooth wireless peripherals? I have much more stability using them over Bluetooth. Bluetooth almost always causes issues for me. Repeated inputs and dropped connections etc.

        • apt_install_coffee@lemmy.mlEnglish
          1·
          3 months ago

          Huh, I guess you could; you’re right, they are. I still can’t think of any open source firmware with support for it.

          • MrScottyTayEnglish
            1·
            3 months ago

            Damn. Wish i was better at low level programming, as I’d attempt it myself

            • apt_install_coffee@lemmy.mlEnglish
              1·
              3 months ago

              There are some open source firmware implantations for some peripherals with wifi dongles, perhaps they could be instructive?