• ArtikBanana@lemmy.dbzer0.comOP
    link
    fedilink
    English
    arrow-up
    10
    ·
    edit-2
    3 months ago

    It might not be as thin as before, but is several microns of thickness not thin?
    It was nice if they gave more details about exactly how thick it is at 27% efficiency though.
    I’ll look around to see if I can find more information about it.

    Edit: And by the way, I’m actually not aware of any 27% solar panels currently in production.
    Other than the ones Ofxord PV has recently begun manufacturing (established by the same Prof. leading this research).

    • jordanlund@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      3
      ·
      3 months ago

      Just quoting the article:

      “from around 6% to over 27%, close to the limits of what single-layer photovoltaics can achieve today.”

      But I guess it depends too on how many layers we’re talking about which isn’t specified.

      • TheGrandNagus@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        3 months ago

        You’re misrepresenting what they say:

        During just five years of experimenting with our stacking or multi-junction approach, we have raised power conversion efficiency from around 6% to over 27%, close to the limits of what single-layer photovoltaics can achieve today.

        We believe that, over time, this approach could enable the photovoltaic devices to achieve far greater efficiencies, exceeding 45%.

        “6% to over 27%” isn’t the range of what they can achieve now. 6% efficiency was where the technology was at 5 years ago, and now they get 27%.