Hello, Archlabs is gone . I use this distro so I wonder If I can still update it safely ?

My /etc/pacman.conf

#[testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

[extra]
Include = /etc/pacman.d/mirrorlist

#[community-testing]
#Include = /etc/pacman.d/mirrorlist

[community]
Include = /etc/pacman.d/mirrorlist

# The multilib repositories are enabled by default in ArchLabs.
# If you don't run 32 bit applications you may comment them out

#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist

[multilib]
Include = /etc/pacman.d/mirrorlist

# [archlabs-testing]
# Server =  https://pub-7d84e047b852442a86fd6d7feb1ff2cd.r2.dev/$repo/$arch
# Server =  https://github.com/ArchLabs/$repo/raw/master/$arch
# Server =  https://bitbucket.org/archlabslinux/$repo/raw/master/$arch

[archlabs]
Server = https://pub-7d84e047b852442a86fd6d7feb1ff2cd.r2.dev/$repo/$arch
Server = https://bitbucket.org/archlabslinux/$repo/raw/master/$arch
Server = https://github.com/ArchLabs/$repo/raw/master/$arch
Server = https://sourceforge.net/projects/archlabs-repo/files/$repo/$arch

If it is unsafe how I can turn this into a normal arch ?

  • @[email protected]
    link
    fedilink
    English
    21
    edit-2
    11 months ago

    You’ll need to do 4 things:

    1. Refresh your keyring
    pacman-keyring --init
    pacman-keyring --populate archlinux
    
    1. Remove the archlabs section from your pacman.conf
    2. pacman -Syyu
    3. Maintenance: https://wiki.archlinux.org/title/System_maintenance#Check_for_orphans_and_dropped_packages

    This should be everything. You’ll need to be careful with removing packages with no upstream. I’m not sure how archlabs distributed their configuration files but if they were packages you’ll have to be selective about what you remove. Ideally you’ll slowly drop those configs for your own versions with future upgrades.

  • UnfortunateShort
    link
    fedilink
    711 months ago

    It’s not unsafe, unless the servers are kept up but not maintained. If you want to turn in into “normal” Arch you have to replace all packages from the Archlabs repos to some from the official (or other) ones. This might be anything from trivial to painful, depending on modifications.

    Also, kinda sad to hear Archlabs is dead, although EndeavourOS is a minimal enough alternative I guess.