With ventoy, you don’t need to format the disk over and over, you just need to copy the ISO files to the USB drive and boot them directly.
Whats ventoy? Ventoy is a free and open-source utility used for writing image files such as .iso, .wim, .img, .vhd(x), and .efi files onto storage media to create bootable USB flash drives. Once Ventoy is installed onto a USB drive, there is no need to reformat the disk to update it with new installation files; it is enough to copy the .
Reading through the issue on github, if you check the blob directories there are at least some level of documentation on how to build them yourself. I haven’t personally tried (rarely need to use ventoy in the first place), but at least thats something
I have tried–the instructions are woefully inadequate. I tried following them to build Ventoy and had to make numerous modifications just to get the first couple of components to build. At that point I gave up
Wasn’t there recently a controvetsy about Ventoy having binary blobs? Or did that get resolved?
Reading through the issue on github, if you check the blob directories there are at least some level of documentation on how to build them yourself. I haven’t personally tried (rarely need to use ventoy in the first place), but at least thats something
I have tried–the instructions are woefully inadequate. I tried following them to build Ventoy and had to make numerous modifications just to get the first couple of components to build. At that point I gave up
Thats good feedback, and very unfortunate
deleted by creator