From what others are saying, the trigger pull is always the same. I’m not familiar with the intricacies of Glocks specifically, but this seems to match with my experience as well.
The other commenter is saying the same thing, just in perhaps a less clear way. I think they are saying the Glock’s trigger weight is between what you would expect of a heavy double action and a light single action. The Glock is a consistent weight every time. The design is often referred to as “safe action striker” or often informally just as “striker” fired. The design lacks a large and heavy hammer that needs to be actuated. Many designs after Glocks were introduced have copied this idea, making it a common alternative design to hammer fired.
Glocks have a half cocked striker once you rack the slide, and this gives a factory glock a trigger pull weight that is directly in between a cocked single-action trigger and an uncocked double-action trigger.
I can see your interpretation of this passage, now that I re-read it. My interpretation of the passage was that, upon racking the slide, you’d have a trigger pull weight between the two. Glad we could clarify hahah.
My interpretation of the passage was that, upon racking the slide, you’d have a trigger pull weight between the two.
Your interpretation is simultaneously correct. If you insert a magazine on a closed Glock and pull the trigger nothing will happen. You need to rack it once to get the first round into the chamber. When you fire that racked round, you get the intermediate trigger pull- but also any other round you fire has the exact same pull.
I think the way it was explained above is bringing in other types of triggers as a comparison (DA/SA triggers), and if you don’t know anything about them, you just end up more lost trying to read it out.
From what others are saying, the trigger pull is always the same. I’m not familiar with the intricacies of Glocks specifically, but this seems to match with my experience as well.
Yes, since there’s no way to fully cock the striker, you always get the ~6lb half cocked trigger pull weight every time.
The other commenter is saying the same thing, just in perhaps a less clear way. I think they are saying the Glock’s trigger weight is between what you would expect of a heavy double action and a light single action. The Glock is a consistent weight every time. The design is often referred to as “safe action striker” or often informally just as “striker” fired. The design lacks a large and heavy hammer that needs to be actuated. Many designs after Glocks were introduced have copied this idea, making it a common alternative design to hammer fired.
I can see your interpretation of this passage, now that I re-read it. My interpretation of the passage was that, upon racking the slide, you’d have a trigger pull weight between the two. Glad we could clarify hahah.
Your interpretation is simultaneously correct. If you insert a magazine on a closed Glock and pull the trigger nothing will happen. You need to rack it once to get the first round into the chamber. When you fire that racked round, you get the intermediate trigger pull- but also any other round you fire has the exact same pull.
I think the way it was explained above is bringing in other types of triggers as a comparison (DA/SA triggers), and if you don’t know anything about them, you just end up more lost trying to read it out.