I have a DURGOD Hades 68 keyboard that I’d love to spruce up with some custom caps. However, I’m not sure where to start with making sure a cap set will fit my board.

I’d really appreciate some advice on how to figure it out? Searching online hasn’t been that fruitful - or I’m not asking the right questions!

Are there any recommended stores for ISO layouts too?

  • ImpossibilityBox@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Keycaps are measured in “u’s”. your standard alpha key is going to be 1u. A shift is often 2.5-3u. Space bars can be 5.5-7u depending on the baord.

    If you can’t find a layout in the documents for your board you can simply measure the “standard” cap and use that as your reference to figure out the rest of your caps.

    Keep an eye out for weird things like your ctrl, alt, fn being different sizes on the left and right side.

    Most good Keycap sets will either include a whole bunch of alternative sizes or have sets you can purchase on top of the base set to fill out your missing pieces.

    Have fun!

    • parmesancrabs@lemmy.mlOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Ah! I see, so if I measure a 1u key, I can then measure other keys and just divide the length to get a “u” value. Thank you!